2014 Roadtec RX700E-3 milling machine | SOLD! December 28 Construction Equipment Auction
2014 Roadtec RX700E-3 milling machine. 3,910 hours on meter, Caterpillar C18 six cylinder diesel engine 755 HP, Serial BDN01873, Hydrostatic transmission, Automatic traction control, Dual operator stations Shock-absorbing platform, Joystick control, 10.5'W cutting drum 14" maximum cutting depth, 5/8" tooth spacing, 46" tip diameter, Dual spray bars, 36"W rubber conveyor belt Canvas cover, Self-cleaning pulleys, 120 degree swing, Grade and slope automation, Digital smooth mill technology, Single/dual averaging ski, Moba rear system, ACE control display, Ground controls Moldboard, Emergency stop, Horn, Loadout conveyor, Rear steering, End gates, Elevation, 340 gallon fuel tank, 100 gallon hydraulic tank, 1,100 gallon water tank, 14"W front tracks, 16"W rear tracks, 53'4"L x 8'9"W x 17'H shipping dimensions, Approximately 85,000 lbs shipping weight, Serial RX700EX2025. View repairs. Markwell Paving Company - Open inspection December 27. 1428 N Portland Ave. Newcastle, OK 73065
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
-
DB5040
2014 Roadtec RX700E-3 milling machine
Markwell Paving Company - Open inspection December 27 (All seller items)
Newcastle, OK
12/28/17
Halted
- 3,910 hours on meter
- Caterpillar C18 six cylinder diesel engine
- 755 HP
- Serial BDN01873
- Hydrostatic transmission
- Automatic traction control
- Dual operator stations
- Shock-absorbing platform
- Joystick control
- 10.5'W cutting drum
- 14" maximum cutting depth
- 5/8" tooth spacing
- 46" tip diameter
- Dual spray bars
- 36"W rubber conveyor belt
- Canvas cover
- Self-cleaning pulleys
- 120 degree swing
- Grade and slope automation
- Digital smooth mill technology
- Single/dual averaging ski
- Moba rear system
- ACE control display
- Ground controls
- Moldboard
- Emergency stop
- Horn
- Loadout conveyor
- Rear steering
- End gates
- Elevation
- 340 gallon fuel tank
- 100 gallon hydraulic tank
- 1,100 gallon water tank
- 14"W front tracks
- 16"W rear tracks
- 53'4"L x 8'9"W x 17'H shipping dimensions
- Approximately 85,000 lbs shipping weight
- Serial RX700EX2025
Markwell Paving Company - Open inspection December 27
1428 N Portland Ave
Newcastle, OK 73065
Purple Wave Shipping, LLC
[email protected]
1.888.838.9095
Take a look at this used 2014 Roadtec RX700E-3 milling machine being sold on December 28th, 2017 in the SOLD! December 28 Construction Equipment Auction made by Roadtec. Take a look at all of the item information below or take a look at similar auctions for Asphalt and Paving Equipment.
All Upcoming Auctions
Asphalt and Paving Equipment
Construction Equipment
Newcastle, OK
Upcoming items within 50 miles of 73065
This Auction
Asphalt and Paving Equipment
Construction Equipment
Newcastle, OK
All items in this auction within 50 miles of 73065
Past Auctions
| From Amount | Up To | Bid Increment |
|---|---|---|
| $10 | $25 | $2.50 |
| $25 | $100 | $5 |
| $100 | $250 | $10 |
| $250 | $1,000 | $25 |
| $1,000 | $2,500 | $50 |
| $2,500 | $10,000 | $100 |
| $10,000 | $50,000 | $500 |
| $50,000 | $1,000,000 | $1,000 |
2014 Roadtec RX700E-3 milling machine for sale in Newcastle, Oklahoma. Item DB5040 will sell on December 28th, 2017.
Purple Wave is selling a used Planer or Milling Machine in Oklahoma. This item is a 2014 Roadtec RX700E-3 milling machine with the following: 3,910 hours on meter, Caterpillar C18 six cylinder diesel engine, 755 HP, Serial BDN01873, Hydrostatic transmission, Automatic traction control, Dual operator stations, Shock-absorbing platform, Joystick control, 10.5'W cutting drum, 14" maximum cutting depth, 5/8" tooth spacing, 46" tip diameter, Dual spray bars, 36"W rubber conveyor belt, Canvas cover, Self-cleaning pulleys, 120 degree swing, Grade and slope automation, Digital smooth mill technology, Single/dual averaging ski, Moba rear system, ACE control display, Ground controls, Moldboard, Emergency stop, Horn, Loadout conveyor, Rear steering, End gates, Elevation, 340 gallon fuel tank, 100 gallon hydraulic tank, 1,100 gallon water tank, 14"W front tracks, 16"W rear tracks, 53'4"L x 8'9"W x 17'H shipping dimensions, Approximately 85,000 lbs shipping weight, Serial RX700EX2025
This 2014 Roadtec RX700E-3 milling machine will sell to the highest bidder regardless of price.