2014 Roadtec RX700E-3 milling machine | SOLD! October 17 Construction Equipment Auction
2014 Roadtec RX700E-3 milling machine. 4,495 hours on meter, Caterpillar C18 six cylinder diesel engine 755 HP, Serial BDN01873, Hydrostatic transmission, Automatic traction control, Dual operator stations Shock-absorbing platform, Joystick control, 7'2"W cutting drum 14" maximum cutting depth, 5/8" tooth spacing, 46" tip diameter, Dual spray bars, 36"W rubber conveyor belt Canvas cover, Self-cleaning pulleys, 120 degree swing, Grade and slope automation, Digital smooth mill technology, Single/dual averaging ski, Moba rear system, ACE control display, Ground controls Moldboard, Emergency stop, Horn, Loadout conveyor, Rear steering, End gates, Elevation, 340 gallon fuel tank, 100 gallon hydraulic tank, 1,100 gallon water tank, 14"W front tracks, 16"W rear tracks, 53'4"L x 8'9"W x 17'H shipping dimensions, Approximately 85,000 lbs shipping weight, Serial RX700EX2025. Transfer of ownership documentation will be a bill of sale. Noble, OK 73068
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
-
DG4175
$127,600
159630
- 4,495 hours on meter
- Caterpillar C18 six cylinder diesel engine
- 755 HP
- Serial BDN01873
- Hydrostatic transmission
- Automatic traction control
- Dual operator stations
- Shock-absorbing platform
- Joystick control
- 7'2"W cutting drum
- 14" maximum cutting depth
- 5/8" tooth spacing
- 46" tip diameter
- Dual spray bars
- 36"W rubber conveyor belt
- Canvas cover
- Self-cleaning pulleys
- 120 degree swing
- Grade and slope automation
- Digital smooth mill technology
- Single/dual averaging ski
- Moba rear system
- ACE control display
- Ground controls
- Moldboard
- Emergency stop
- Horn
- Loadout conveyor
- Rear steering
- End gates
- Elevation
- 340 gallon fuel tank
- 100 gallon hydraulic tank
- 1,100 gallon water tank
- 14"W front tracks
- 16"W rear tracks
- 53'4"L x 8'9"W x 17'H shipping dimensions
- Approximately 85,000 lbs shipping weight
- Serial RX700EX2025
Noble, OK 73068
Purple Wave Shipping, LLC
[email protected]
1.888.838.9095
Take a look at this used 2014 Roadtec RX700E-3 milling machine being sold on October 17th, 2019 in the SOLD! October 17 Construction Equipment Auction made by Roadtec. Take a look at all of the item information below or take a look at similar auctions for Asphalt and Paving Equipment.
| From Amount | Up To | Bid Increment |
|---|---|---|
| $10 | $25 | $2.50 |
| $25 | $100 | $5 |
| $100 | $250 | $10 |
| $250 | $1,000 | $25 |
| $1,000 | $2,500 | $50 |
| $2,500 | $10,000 | $100 |
| $10,000 | $50,000 | $500 |
| $50,000 | $1,000,000 | $1,000 |
2014 Roadtec RX700E-3 milling machine has sold in Noble, Oklahoma for $127600. Item DG4175 sold on October 17th, 2019.
Purple Wave is selling a used Planer or Milling Machine in Oklahoma. This item is a 2014 Roadtec RX700E-3 milling machine with the following: 4,495 hours on meter, Caterpillar C18 six cylinder diesel engine, 755 HP, Serial BDN01873, Hydrostatic transmission, Automatic traction control, Dual operator stations, Shock-absorbing platform, Joystick control, 7'2"W cutting drum, 14" maximum cutting depth, 5/8" tooth spacing, 46" tip diameter, Dual spray bars, 36"W rubber conveyor belt, Canvas cover, Self-cleaning pulleys, 120 degree swing, Grade and slope automation, Digital smooth mill technology, Single/dual averaging ski, Moba rear system, ACE control display, Ground controls, Moldboard, Emergency stop, Horn, Loadout conveyor, Rear steering, End gates, Elevation, 340 gallon fuel tank, 100 gallon hydraulic tank, 1,100 gallon water tank, 14"W front tracks, 16"W rear tracks, 53'4"L x 8'9"W x 17'H shipping dimensions, Approximately 85,000 lbs shipping weight, Serial RX700EX2025
This 2014 Roadtec RX700E-3 milling machine will sell to the highest bidder regardless of price.