Reclaimer or Stabilizer For Sale
Your nationwide no-reserve equipment auction. Purple Wave - Straight. Simple. Sold.
Register Now!Sort by
Current Bid
$14,500.00
/ 7 Bids
Beniach Construction
Tuscola, IL
10/22/2026 Thursday
- Hours: 6,342 on meter
- Hours on reclaimer: 6,228 hours
- Serial: CATRM500HASW00184
- Caterpillar C15
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Four wheel drive
- Enclosed cab
- AC, Heat
- Cutting head
- Width: 96"
- Cutting speeds: 3
- Teeth
- Carbide
- Water/emulsion application system
- Grade & slope controls
- Front: 26.5-25
- Rear: 23.1-26
Recommended For You
- Hours: 3,201 on meter
- Serial: CATAP655VMH600228
- Fuel type: Diesel
- Hydrostatic
- Caterpillar SE50 VT
- Serial: J6K00154
- Paving width: 8' to 16'
- Material conveyor
- Width: 44"
- Wash down system
- Grade and slope controls
- Width: 16"
- Rubber
- Hours: 46 on meter
- Serial: W9P1648PJ0001101
- Yanmar
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Screed
- Paving width: 8' to 13'
- Screed heater: Propane
- Sonic
- Wash down system
- Width: 12"
- Steel
- Hours: 3,146 on meter
- Serial: 281111
- Kubota V3800-CR-TI-EV02
- Displacement: 3.8L
- Cylinders: 4
- Fuel type: Diesel
- kW: 85
- Hydrostatic
- Screed
- Leeboy Legend
- Paving width: 8' to 15'
- Screed heater: Electric
- Material conveyor
- Width: 36"
- Truck hitch
- Ground level remote
- Grade and slope controls
- Width: 14"
- Steel
- Serial: 1820009482HD CARR
- Additional features
- (2) 30' x 80" sections
- (2) Kohler Command gas engines
- Cylinders: 2
- Unknown operating condition
Current Bid
$3,600.00
/ 23 Bids
Warrensburg, MO
10/13/2026 Tuesday
- Hours: 21 on meter
- VIN: 1K9BU0919LN246004
- Serial: 2001004IR40C1M1-57130
- 8' L x 5' W
- Heater: Propane
- Ball hitch: 2"
- Suspension: Spring
- GVWR: 1,180
- Size: 4.80-8
- Solar panel cracked
- Hours: 640 on meter
- VIN: 1C9EK0915T1418283
- Isuzu
- Cylinders: 2
- Fuel type: Diesel
- Tank capacity: 100 gallons
- Temperature range: 200 - 450°F
- Front: 185R14
- Tar pot corrosion issues, holes
Transfer of ownership documentation will be a bill of sale.
Current Bid
$2,500.00
/ 8 Bids
Garden City, KS
10/20/2026 Tuesday
- Hours: 998 on meter
- VIN: 1C91M13116M119075
- KDOT ID: 492-4026
- Overall
- Length: 16'
- Width: 80"
- Isuzu
- Cylinders: 3
- Fuel type: Diesel
- Hitch: Pintle
- Landing gear: Single
- Axles: Single
- Suspension: Spring
- Size: 235/85R16
- Battery needs replaced
- Jump start required during on-site data collection
Kansas title
Title distribution may be delayed up to 30 days from verification of funds.
- Hours: 3,060 on meter
- VIN: 1C92M15289M119069
- Overall
- Length: 14' 8"
- Width: 84"
- Height: 93"
- GVWR: 7,000 lbs
- GAWR: 3,500 lbs
- Isuzu 3GB1-C
- Serial: 004134
- Displacement: 1.116L
- Cylinders: 3
- Fuel type: Diesel
- CimLine 230DH tar pot
- Capacity: 230 gallons
- Spray wand
- Front: 205/75R15
Transfer of ownership documentation will be a bill of sale.
- Hours: 2,614 on meter
- Serial: 0921 0358
- Caterpillar C18 ATAAC
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Cutting head
- Width: 87"
- Diameter: 42"
- Teeth
- Carbide
- Water/emulsion application system
- Grade & slope controls
- Ground controls
- Width: 14"
- Steel
- Hours: 2,633 on meter
- Serial: 902900-652
- Cummins
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Paving width: 2' to10'
- Molds: 0
- Cutting head
- Width: 42"
- Conveyor
- 15' L x 22" W
- Water system
- Hose
- Width: 12"
- Steel
- Grouser pads: Triple
- VIN: 1S9A315168042036
- Overall
- Length: 15' 5"
- Width: 73"
- Honda GX160
- Cylinders: 1
- Fuel type: Gas
- Air Compressor
- Honda GX 160 engine
- Trailer
- Axles: Single
- Suspension: Spring suspension
- Landing gear: Single
- Storage platform: 73" W x 50" L
- Manual ramp: 32" W x 48" L
- Tank
- Agitator
- Hose reel
- Outlet: 2"
- Tank capacity: 300 gallons
- Front: 225/75R15
- Pump issues, needs replaced
Transfer of ownership documentation will be a bill of sale.
- Hours: Unknown
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Paving width: 12' to19'
- Auger
- Length: 202"
- Diameter: 16"
- Water system
- Tank capacity: 110 gallons
- Additional features
- Slope controls
- Width: 12"
- Steel
- Grouser pads: Triple
- Unknown operating condition of water pump
Current Bid
$1,150.00
/ 8 Bids
Oklahoma City, OK
9/24/2026 Thursday
- Hours: 4,220 on meter
- VIN: 1C9SV1226Y1418186
- Overall
- Length: 13' 4"
- Width: 5' 4"
- Isuzu 3LD1 EA-01
- Cylinders: 3
- Fuel type: Diesel
- Front: 185R14C
Current Bid
$1,050.00
/ 7 Bids
Colton, CA
10/07/2026 Wednesday
- VIN: 5F12S1619L1000147
- VIN: 5F12S1616L1002888
- VIN: 5F12S1616L1002891
- Unit #: 65562636
- Overall
- Length: 16'
- Width: 96"
- Suspension: Spring
- GVWR: 3,600lbs
- Tire size: 205/75D15
Please review REQUIRED REMOVAL INSTRUCTIONS
This is worksite support equipment and will not come with a title.
Transfer of ownership documentation will be a bill of sale.
- Hours: 3,151 on meter
- Serial: MC10264-00
- General Motors
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Molds: 1
- Cutting head
- Width: 47"
- Conveyor
- 18' L x 22" W
- Additional features
- Telescoping frame
- Width: 10"
- Steel
- Grouser pads: Double
Recently Sold
Contract Price
$105,600.00
Smithville, TX
9/15/2026 CLOSED
- Hours: 364 on meter
- Hours: Unknown
- Serial: 03WR0515
- Mercedes-Benz OM 460 LA
- Displacement: 12.8L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Cutting head
- Width: 94"
- Cutting speeds: 4
- Teeth
- Water/emulsion application system
- Grade & slope controls
- Front: 23.1-26
- Rear: 23.1R26
- Original hours unknown, electronics replaced
- Approx. 1,650 additional teeth included
- Cutting depth does not display correctly
- Tire damaged, needs replaced
- Hours: 270 on meter
- Actual hours unknown
- Serial: 86108
- Detroit Diesel
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- OROPS
- Cutting head
- Width: 74"
- Diameter: 42"
- Teeth
- Carbide
- Discharge conveyor
- 7'
- Front: 11.25-24
- Rear: 28L-26
- Reclaimer cutting head removed but included
- Non-operational unit
- Hours: 4,205 on meter
- Serial: 901B23001671
- Unit #: 080801
- Cummins M11
- Serial: 35234968
- Displacement: 10.8L
- Cylinders: 6
- Fuel type: Diesel
- HP: 360
- kW: 263
- Hydrostatic
- Two speed travel
- OROPS
- Canopy
- Cutting head
- Width: 84"
- Diameter: 48"
- Teeth
- Carbide
- Water/emulsion application system
- Front: 14.9-24
- Rear: VF750/65R26
- Hours: 4,641 on meter
- Serial: HK964
- Detroit Diesel 10437100
- Serial: 4A0184437
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Canopy
- Rex Pulvi-Mixer attachment
- Width: 90"
- Front: 9.00-24
- Rear: 18.4-34
- Additional teeth included
Contract Price
$41,800.00
Oklahoma City, OK
12/31/2025 CLOSED
- Hours: 5,322 on meter
- Serial: 901A22301530
- Unit #: MX03
- Cummins N14
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Canopy
- Cutting head
- Width: 100"
- Diameter: 44"
- Teeth
- Carbide
- Water/emulsion application system
- Front: 14.9-24R1
- Rear: 26.5-25
Contract Price
$116,600.00
Aquilla, TX
12/31/2025 CLOSED
- Hours: 1,143 on meter
- Serial: 941913221020
- Caterpillar C13
- Serial: KWJ04581
- Displacement: 12.5L
- Cylinders: 6
- Fuel type: Diesel
- HP: 415
- kW: 309.5
- Hydrostatic
- Enclosed cab
- AC, Heat
- Cutting head
- Width: 96"
- Diameter: 50"
- Cutting speeds: 3
- Size: 26.5-25
- Hours: 5,436 on meter
- Serial: SX6E-105
- Cummins QSX15-600
- Serial: 79633280
- Displacement: 15.0L
- Cylinders: 6
- Fuel type: Diesel
- HP: 600
- kW: 447
- Hydrostatic
- Enclosed cab
- AC, Heat
- Steering: Crab
- Cutting head
- Width: 96"
- Diameter: 48"
- Carbide
- Grade & slope controls
- Ground controls
- Size: 28L-26
- Hours: 4,341 on meter
- Serial: 901B23001657
- Cummins QSM11
- Serial: 35208734
- Displacement: 10.8L
- Cylinders: 6
- Fuel type: Diesel
- HP: 360
- kW: 268
- Hydrostatic
- Two speed travel
- OROPS
- Canopy
- Cutting head
- Width: 84"
- Diameter: 48"
- Teeth
- Carbide
- Grade and slope controls
- Front: 14.9-24
- Rear: 28LB26
- Hours: 247 on meter
- Serial: 101590181034
- Unit #: 68284705
- Mercedes-Benz OM471LA.E5-3
- Serial: 471.945-C-0832775
- Displacement: 12.8L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Cutting head
- Width: 96"
- Teeth
- Carbide
- Auto lube
- Water/emulsion application system
- Grade & slope controls
- Front: 24.5-32
- Rear: 23.1-26
- Brand: BKT
- Glass cracked
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 872
- Serial: 901B23001684
- Cummins COSM11
- Serial: 35279081
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Four wheel drive
- Canopy
- Cutting head
- Width: 78"
- Carbide
- Asphalt bits
- Front: 281-26
- Rear: 14.9-24
Contract Price
$26,400.00
West Des Moines, IA
10/09/2025 CLOSED
- Hours: 2,892 on meter
- Serial: 6ED00240
- Caterpillar 3406B
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Cutting head
- Width: 100"
- Carbide
- Front: 23.5-25
- Rear: 15.5-25
Contract Price
$181,500.00
Artesia, NM
9/25/2025 CLOSED
- Hours: 1,053 on meter
- Serial: 09WR0081
- Mercedes-Benz OM 470 LA
- Displacement: 652.9 C.I.D.
- Cylinders: 6
- Fuel type: Diesel
- HP: 429
- Hydrostatic
- Enclosed cab
- AC, Heat
- Cutting head
- Width: 7"
- Diameter: 10"
- Carbide
- Maximum cutting depth: 19.7"
- Four wheel steer
- Size: 23.1R26
- Hours: 1,369 on meter
- Serial: 109B22806341
- Detroit Diesel
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- OROPS
- Cutting head
- Width: 80"
- Diameter: 46"
- Carbide
- Front: 11.25-24
- Rear: 28L-26
- Hydraulic leak
- Dead battery
- Hours: 2,354 on meter
- Serial: 85723
- Detroit Diesel
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Cutting head
- Width: 84"
- Diameter: 21"
- Cutting speeds: 2
- Front: 11.25-24
- Rear: 28L-26
- Non-operational engine
- Non-operational unit
- Hours: 1,502 on meter
- Serial: CATRM400JAK300108
- Unit #: 8197
- Caterpillar C9.3
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Enclosed cab
- AC, Heat
- Cutting head
- Width: 96"
- Diameter: 54"
- Cutting speeds: 3
- Teeth
- Front: 28L-26
- Rear: 18.4-30
- Warning indicator: E1305
Ready to Buy or Sell Reclaimer or Stabilizer?
Join countless satisfied customers who helped us achieve 400,000+ successful equipment transactions in the last decade!
Browse More Options For Reclaimer or Stabilizer
Looking for more options? Explore the below links to find the match for your needs.