Drilling Rig For Sale
Your nationwide no-reserve equipment auction. Purple Wave - Straight. Simple. Sold.
Register Now!4 Results
Auction Date
Zip Radius
Zip Code
Range
Make
Model
Ingersoll Rand
Year
Minimum Year
Maximum Year
State
City
Missouri
Current Bid
Sort by
Current Bid (9-0)
30 / page
EO41821996 Ingersoll Rand CM695D drilling rig
Current Bid
$130.00
/ 5 Bids
Sams Drilling Service Inc
Seligman, MO
5/21/2026 Thursday
1996 Ingersoll Rand CM695D drilling rig
- Hours: 10,565 on meter
- Actual hours unknown
- Serial: R18017AD
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Down hole hammer drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Rear doors will be installed prior to auction close
- Door latch issues
- Glass cracked
- Dust collector hoses need replaced
- Drill stems not included
- Warning indicator: High hydraulic oil temp
- Oil leak
- Engine shut off issues, must be shut off at fuel solenoid
EO41811997 Ingersoll Rand ECM690 drilling Rig
Current Bid
$55.00
/ 4 Bids
Sams Drilling Service Inc
Seligman, MO
5/21/2026 Thursday
1997 Ingersoll Rand ECM690 drilling Rig
- Hours: 9,138 on meter
- Actual hours unknown
- Serial: R16057BE
- Caterpillar 3306B DI
- Serial: 63Z07951
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Drill bit width: 3.5"
- (6) drill stems: 12' L
- Diameter: 2"
- (1) 14' L
- Diameter: 2"
- T51 rods 12' L
- YH135 drifter drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Glass cracked
- AC issues, needs charged
- Warning indicator: Red temperature light
EO41802001 Ingersoll Rand CM695D drilling rig
Current Bid
$17.50
/ 3 Bids
Sams Drilling Service Inc
Seligman, MO
5/21/2026 Thursday
2001 Ingersoll Rand CM695D drilling rig
- Hours: 10,746 on meter
- Actual hours unknown
- Serial: G18089BJ
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Dust collection system
- Water suppression system
- Down hole hammer drill
- Width: 14"
- Steel
- Glass cracked
- Drill stems not included
- Dust collection hoses, needs replaced
- Warning indicator: Red temp, pressure lights
EO41831990 Ingersoll Rand ECM690/YH100 drilling rig
Current Bid
$15.00
/ 2 Bids
Sams Drilling Service Inc
Seligman, MO
5/21/2026 Thursday
1990 Ingersoll Rand ECM690/YH100 drilling rig
- Hours: 19,317 on meter
- Actual hours unknown
- Serial: B15005BR
- Unit #: 99
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Engine
- Drill bit stems
- Total length: 12'
- Diameter: 2"
- Drill bit stems
- YH100 drifter
- T51 rod length: 12'
- Dust collector system
- Water suppression system
- Width: 14""
- Steel
- Engine rebuilt October 2021
- Glass cracked
- Air system diaphragm issues, will be repaired prior to auction
- Extendable boom cylinder issues, seals need replaced
- Dust collector hoses need replaced
- Unknown operating condition of HVAC system
Newly Listed
EO41821996 Ingersoll Rand CM695D drilling rig
- Hours: 10,565 on meter
- Actual hours unknown
- Serial: R18017AD
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Down hole hammer drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Rear doors will be installed prior to auction close
- Door latch issues
- Glass cracked
- Dust collector hoses need replaced
- Drill stems not included
- Warning indicator: High hydraulic oil temp
- Oil leak
- Engine shut off issues, must be shut off at fuel solenoid
EO41831990 Ingersoll Rand ECM690/YH100 drilling rig
Current Bid
$15.00
/ 2 Bids
Seligman, MO
5/21/2026 Thursday
1990 Ingersoll Rand ECM690/YH100 drilling rig
- Hours: 19,317 on meter
- Actual hours unknown
- Serial: B15005BR
- Unit #: 99
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Engine
- Drill bit stems
- Total length: 12'
- Diameter: 2"
- Drill bit stems
- YH100 drifter
- T51 rod length: 12'
- Dust collector system
- Water suppression system
- Width: 14""
- Steel
- Engine rebuilt October 2021
- Glass cracked
- Air system diaphragm issues, will be repaired prior to auction
- Extendable boom cylinder issues, seals need replaced
- Dust collector hoses need replaced
- Unknown operating condition of HVAC system
EO41811997 Ingersoll Rand ECM690 drilling Rig
- Hours: 9,138 on meter
- Actual hours unknown
- Serial: R16057BE
- Caterpillar 3306B DI
- Serial: 63Z07951
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Drill bit width: 3.5"
- (6) drill stems: 12' L
- Diameter: 2"
- (1) 14' L
- Diameter: 2"
- T51 rods 12' L
- YH135 drifter drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Glass cracked
- AC issues, needs charged
- Warning indicator: Red temperature light
EO41802001 Ingersoll Rand CM695D drilling rig
- Hours: 10,746 on meter
- Actual hours unknown
- Serial: G18089BJ
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Dust collection system
- Water suppression system
- Down hole hammer drill
- Width: 14"
- Steel
- Glass cracked
- Drill stems not included
- Dust collection hoses, needs replaced
- Warning indicator: Red temp, pressure lights
Recommended For You
EU48322020 Caterpillar 395 excavator
- Hours: 9,679 on meter
- Serial: CAT00395PLTK00202
- Unit #: 21587
- Caterpillar C18
- Displacement: 16.1L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Pattern changer
- Counter weights, Removable
- Auto lube
- Boom
- Standard
- Stick
- Stick length: 11' 6"
- Bucket
- Width: 92"
- Teeth: 5
- Width: 30"
- Steel
- Grouser pads: Double
- Warning indicator: Fault code
FC21942019 Caterpillar D8T dozer
- Hours: 19,960 on meter
- Miles or hours may vary, unit still in use
- Serial: CAT00D8TCAW400342
- Unit #: 30227
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 3F - 3R
- Enclosed cab
- AC, Heat
- Backup camera
- Electronic Monitoring System panel
- Steering: Differential
- Dozer blade
- Blade type: Dual-tilt
- Blade shape: Semi-U
- Width: 13' 2"
- Attachments
- Ripper
- Caterpillar D8T
- Shanks: 2
- Ripper
- Width: 24"
- Grouser pads: Single
- Bottom rollers: 8
- Non-operational backup camera
YA26422023 Komatsu WA380-8 wheel loader
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 5,078 on meter
- Serial: A76014
- Unit #: 79024125
- Komatsu SAA6D107E-3-B
- Serial: 74969839
- Displacement: 6.7L
- Cylinders: 6
- Fuel type: Diesel
- HP: 192
- Powershift
- 4F - 4R
- Enclosed cab
- AC, Heat
- Bucket controls: Two-lever
- Ride control
- Quick coupler: Hydraulic
- Counter weights
- Self-leveling loader
- Bucket
- JRB
- Width: 114"
- Cutting edge: Bolt-on
- Forks
- JRB WA380
- Length: 72"
- Size: 23.5R25
Please review REQUIRED REMOVAL INSTRUCTIONS
ED52122022 Caterpillar 336 excavator
- Hours: 3,887 on meter
- Serial: CAT00336KDKS20413
- Unit #: 150x6631
- Caterpillar C9.3B
- Serial: XWE13379
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- HP: 314
- Hydrostatic
- Enclosed cab
- AC, Heat
- Backup camera
- Auxiliary hydraulics
- Two-way
- Counter weights
- Boom
- Standard
- Stick
- Stick length: 10' 6"
- Quick coupler: Hydraulic
- Caterpillar
- Bucket
- Caterpillar
- Width: 60"
- Teeth: 6
- Width: 33.5"
- Steel
- Grouser pads: Triple
YA29122024 Caterpillar 308CR mini excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 657 on meter
- Serial: CAT00308HGG809967
- Unit #: 46677556
- Caterpillar C3.3B
- Displacement: 3.3L
- Cylinders: 4
- Fuel type: Diesel
- kW: 54.6
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Auxiliary hydraulics
- Two-way
- Counter weights, Removable
- Backfill blade
- Width: 90"
- Boom
- Swing
- Stick
- Stick length: 6' 7"
- Quick coupler: Hydraulic
- Thumb: Hydraulic
- Bucket
- Width: 24"
- Teeth: 4
- Width: 18"
- Steel
- Grouser pads: Triple
- Track pads: Rubber
- Manufacturers premier warranty valid until April 5, 2029 or 2,000 hours
Please review REQUIRED REMOVAL INSTRUCTIONS
YA29082023 Caterpillar 308CR mini excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 1,166 on meter
- Serial: GG808050
- Unit #: 46674566
- Caterpillar C3.3B
- Serial: 8NW2969
- Displacement: 3.3L
- Cylinders: 4
- Fuel type: Diesel
- kW: 54.6
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Auxiliary hydraulics
- Two-way
- Counter weights, Removable
- Backfill blade
- Boom
- Swing
- Quick coupler: Hydraulic
- Thumb: Hydraulic
- Bucket
- Teeth: 4
- Steel
- Track pads: Rubber
- Manufacturers powertrain plus hydraulic warranty valid until May 11, 2028 or 2,000 hours
Please review REQUIRED REMOVAL INSTRUCTIONS
YA28942023 Komatsu WA320-8 wheel loader
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 6,092 on meter
- Serial: A51429
- Unit #: 46481396
- Komatsu
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 4F - 4R
- Enclosed cab
- AC, Heat
- Bucket controls: Joystick
- Ride control
- Quick coupler: Hydraulic
- Self-leveling loader
- Bucket
- Asbury JRB416
- Width: 106"
- Cutting edge: Bolt-on
- Forks
- Asbury
- Length: 60"
- Size: 20.5R25
Please review REQUIRED REMOVAL INSTRUCTIONS
DW12822020 Caterpillar 982M wheel loader
- Hours: 19,339 on meter
- Serial: CAT0982MEXDL00722
- Unit #: 20449
- Caterpillar C13
- Cylinders: 6
- Fuel type: Diesel
- HP: 398
- Powershift
- 4F - 4R
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Bucket controls: Joystick
- Ride control
- Counter weights
- Auto lube
- Self-leveling loader
- Bucket
- Caterpillar
- Capacity: 675 cu.yd.
- Width: 140"
- Cutting edge: Bolt-on
- Size: 875/65R29
YA29222024 Caterpillar 308CR mini excavator
Current Bid
$61,000.00
/ 22 Bids
Airway Heights, WA
5/07/2026 Thursday
2024 Caterpillar 308CR mini excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 762 on meter
- Serial: CAT00308AGG810095
- Unit #: 46684306
- Caterpillar C3.3B
- Serial: 8PN8523
- Displacement: 3.3L
- Cylinders: 4
- Fuel type: Diesel
- kW: 54.6
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Auxiliary hydraulics
- Two-way
- Counter weights, Removable
- Backfill blade
- Width: 90"
- Boom
- Swing
- Stick
- Stick length: 94"
- Quick coupler: Hydraulic
- Caterpillar
- Thumb: Hydraulic
- Bucket
- Caterpillar
- Width: 24"
- Teeth: 4
- Width: 18"
- Steel
- Grouser pads: Double
- Track pads: Rubber
- Manufacturers premier warranty valid until April 18, 2029 or 2,000 hours
Please review REQUIRED REMOVAL INSTRUCTIONS
FC55702018 Caterpillar 963K track loader
- Hours: 10,579 on meter
- Serial: CAT0963KVLBL00656
- Caterpillar C7.1
- Serial: D8T32D97
- Displacement: 7.01L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Bucket controls: Joystick
- Quick coupler: Hydraulic
- Counter weights
- Bucket
- Width: 99"
- Teeth: 8
- Width: 22"
- Grouser pads: Double
YA29092024 Caterpillar 299D3 XE tracked skid steer loader
Current Bid
$59,000.00
/ 29 Bids
Helena, MT
5/07/2026 Thursday
2024 Caterpillar 299D3 XE tracked skid steer loader
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 278 on meter
- Serial: CAT299D3JB6202166
- Unit #: 46675456
- Caterpillar C3.8
- Displacement: 3.8L
- Fuel type: Diesel
- kW: 81.8
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Bucket control: Hand
- Electronic Monitoring System panel
- Auxiliary hydraulics
- High flow
- Auxiliary electrical outlet
- Quick coupler: Hydraulic
- Counter weights
- Bucket
- WBM
- Width: 84"
- Teeth: Bolt-on
- Width: 18"
Please review REQUIRED REMOVAL INSTRUCTIONS
ED52082022 Caterpillar 938M wheel loader
Current Bid
$57,000.00
/ 12 Bids
Cedar Park, TX
5/21/2026 Thursday
2022 Caterpillar 938M wheel loader
- Hours: 4,343 on meter
- Serial: CAT0938MHP5K03068
- Unit #: 178x5794
- Caterpillar C7.1
- Serial: J7A22455
- Displacement: 7.01L
- Cylinders: 6
- Fuel type: Diesel
- kW: 140
- Powershift
- 4F - 4R
- Enclosed cab
- AC, Heat
- Bucket controls: Joystick
- Ride control
- Quick coupler: Hydraulic
- Counter weights
- Self-leveling loader
- Bucket
- Caterpillar
- Capacity: 4 cu.yd.
- Width: 108"
- Cutting edge: Bolt-on
- Forks
- Caterpillar
- Length: 66"
- Size: 20.5R25
EA46872012 Caterpillar 336E excavator
- Hours: 11,320 on meter
- Serial: CAT0336ELBZY00931
- Caterpillar C9.3
- Serial: MME03964
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Pattern changer
- Auxiliary hydraulics
- Standard
- Counter weights, Removable
- Boom
- Standard
- Stick
- Stick length: 13'
- Quick coupler: Hydraulic
- Caterpillar
- Thumb: Hydraulic
- Caterpillar 336E
- Bucket
- Caterpillar
- Width: 68"
- Teeth: 7
- Width: 34"
- Steel
- Grouser pads: Triple
YA29102024 Caterpillar 299D3 XE tracked skid steer loader
Current Bid
$54,000.00
/ 26 Bids
Helena, MT
5/07/2026 Thursday
2024 Caterpillar 299D3 XE tracked skid steer loader
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 338 on meter
- Serial: CAT299D3CB6202024
- Unit #: 46675996
- Caterpillar C3.8
- Displacement: 3.8L
- Cylinders: 4
- Fuel type: Diesel
- kW: 81
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Bucket control: Hand
- Electronic Monitoring System panel
- Auxiliary hydraulics
- High flow
- Auxiliary electrical outlet
- Quick coupler: Hydraulic
- Counter weights
- Bucket
- Caterpillar
- Width: 80"
- Cutting edge: Bolt-on
- Width: 18"
Please review REQUIRED REMOVAL INSTRUCTIONS
FH70182017 Caterpillar D6N XL dozer
- Hours: 4,168 on meter
- Serial: CAT00D6NVNJN00143
- Caterpillar
- Serial: D8T20906
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 3F - 3R
- Enclosed cab
- AC, Heat
- Electronic Monitoring System panel
- Steering: Differential
- Dozer blade
- Blade type: Single-tilt
- Blade shape: Semi-U
- Width: 123"
- Attachments
- Ripper
- Shanks: 3
- Ripper
- Width: 24"
- Grouser pads: Single
- Bottom rollers: 7
- Glass cracked
Recently Sold
FG00562000 Simco 4000 TR-2 drilling rig
- Hours: 87 on meter
- Serial: 001784
- Unit #: G8690
- Deutz F4L912
- Displacement: 3.77L
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Bed/ drill
- Simco
- Engine
- Mast height: 20'
- Drill bit stems
- Pump
- Moyno 3L6 CDQ
- Width: 18"
- Rubber
- Hydraulic leak
- Track pad issues
- Jump start required during on-site data collection
2013 IMT AF250E LCA drilling rig
- Hours: 9,306 on meter
- Hours: 9,304 on second meter
- VIN: CAT0336EJT3Z00221
- Unit #: Z1019
- Caterpillar 336E
- Caterpillar C9.3
- Serial: MYE00209
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- HP: 236
- Hydrostatic
- AC, Heat
- Bed/ drill
- Serial: 250ELCANXV1763
- Width: 168"
- Mast height: 74'
- Kelly bar
- Width: 28"
- Steel
- Maintenances records available upon request to [email protected]
2013 IMT AF270E drilling rig
- Hours: 8,482 on meter
- Hours: 8,481 on second meter
- VIN: CAT0349EHS3P00205
- Unit #: Z1028
- Caterpillar 349E
- Caterpillar C13
- Displacement: 12.5L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Bed/ drill
- Serial: AF27ONXV1754
- Length: 51'
- Width: 168"
- Mast height: 74'
- Kelly bar
- Width: 31"
- Steel
- Additional parts included
- Winch cable
- Wear plates
- Maintenances records available upon request to [email protected]
ND94302008 Ford F450 Crew Cab mobile drilling rig
Contract Price
$3,410.00
Grand Forks, ND
10/23/2025 CLOSED
2008 Ford F450 Crew Cab mobile drilling rig
Title distribution may be delayed up to 14 days from verification of funds.
- Miles: 199,321 on odometer
- Hours: 2,024 on meter
- VIN: 1FDXW47R18EB64201
- Unit #: S01368
- Displacement: 6.4L
- Cylinders: 8
- Fuel type: Diesel
- Manual
- Speed: 6
- Four wheel drive
- Axles: Single
- Suspension: Spring
- Brakes: Hydraulic
- PTO
- GVWR: 16,000 lbs
- AC, Heat
- Auxiliary controls
- Bed
- Utility bed
- Mobile Drill
- Length: 14'
- Width: 93"
- Engine
- Mast height: 10'
- Drill bit width: 5"
- Work platform
- Drill bit stems
- Total length: 35'
- Diameter: 5"
- Size: 225/70R19.5
- Has front landing gear
- Dead battery
- Non-operational engine
- Non-operational unit
Title distribution may be delayed up to 14 days from verification of funds.
Klemm MR701 drilling machine
Transfer of ownership documentation will be a bill of sale.
- Double clamp
- Electric power unit
- Phase: Three
- Diesel power unit
- Deutz engine
- Fuel type: Diesel
- Tire size: 205/75D14
- Width: 7.5"
- Hydraulic seal issues, needs replaced
- Unknown operating condition
Transfer of ownership documentation will be a bill of sale.
EM71631996 Charles Machine Works Inc. FP22 vertical drill rig
Contract Price
$1,815.00
Odessa, MO
5/22/2025 CLOSED
1996 Charles Machine Works Inc. FP22 vertical drill rig
- Hours: 1,429 on meter
- VIN: 6N0422
- Kohler
- Cylinders: 2
- Fuel type: Gas
- Hydrostatic
- Width: 9"
- Steel
- Dead battery
- Unknown operating condition
2020 CZM EK125 drilling rig
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 2,824 on meter
- Serial: SAV0230
- Unit #: 45704435
- Caterpillar C7.1 Acert
- Displacement: 7.1L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- CZM Canbus monitoring system
- Base: Caterpillar 323 excavator
- Mast: 44' 6" L
- Crowd cylinder: 11' L
- Drum diameter: 18"
- Counter weight
- Width: 23"
- Grouser pads: Triple
- Steel
- Extendable tracks
- Cab damaged
Please review REQUIRED REMOVAL INSTRUCTIONS
Krupp drilling rig
- Hours: 3,132 on meter
- Deutz
- Cylinders: 6
- Fuel type: Diesel
- Drill bit width: 6"
- Width: 12"
- Steel
- Dead battery
- hydraulic leak
DW24242011 Atlas Copco PowerROC T35 surface drilling rig
Contract Price
$26,400.00
West Burlington, IA
12/31/2024 CLOSED
2011 Atlas Copco PowerROC T35 surface drilling rig
- Hours: 4,081 on meter
- Serial: X013058BA
- Cummins QSB6.7
- Displacement: 6.7L
- Cylinders: 6
- Fuel type: Diesel
- HP: 190
- kW: 142
- Hydrostatic
- 2F - 2R
- Width: 12"
- Steel
- Hydraulic leaks
- Track pads missing
Cable tool drilling rig trailer
Transfer of ownership documentation will be a bill of sale.
- Hours: 50 on meter
- AMBAC
- Cylinders: 6
- Fuel type: Diesel
- PTO
- McKissick crane block
- Size: 10.00R20
- Tools not included
- Unknown operating condition
Transfer of ownership documentation will be a bill of sale.
Shop Built drilling rig
- Hours: 1,473 on meter
- Cylinders: 4
- Fuel type: Gas
- Manual
- Engine
- Mast height: 10'
- Front: 9.5-16
- Battery missing
- Unknown operating condition
1999 CME 850 drilling rig
- Hours: 8,683 on meter
- Serial: 292492
- Cummins 4BT
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Mast height: 23'
- Pump
- Moyno 3L8
- Size: 3" diameter
- Moyno 3L8
- Width: 33"
- Rubber
- Steel
- Stem not included
1974 CME 750 drilling rig
- Serial: 91748
- Cylinders: 6
- Fuel type: Gas
- Manual
- Speed: 5
- Axles: Single
- Brakes: Hydraulic
- Mast height: 22'
- Pump
- Moyno 3L6
- Size: 3" diameter
- Front: 48x25.00-20
- Rear: 48x31.00-20
- Brand: Firestone
- Stem not included
2006 Soilmec R516 HD drilling rig
- Hours: 7,376 on meter
- VIN: 2583
- Caterpillar 3126
- Cylinders: 6
- Fuel type: Diesel
- HP: 230
- Hydrostatic
- AC, Heat
- Kelly bar length: 15'
- 5.5" drive
- Rotary torque: 180 kNm
- Winch: dual
- Counter weight, Removable
- Width: 28"
- Steel
- Extendable tracks
- Non-operational AC
2007 Watson 2500TM drilling rig John Deere Cylinders: 4 Fuel: Diesel Transmission
- Hours: Unknown
- Serial: 0184
- Powershift
- 6F - 6R
- Mast height: 49'
- Previously truck mounted
Ready to Buy or Sell Drilling Rig?
Join countless satisfied customers who helped us achieve 400,000+ successful equipment transactions in the last decade!
Browse More Options For Drilling Rig
Looking for more options? Explore the below links to find the match for your needs.
