Drills and Drilling Rigs For Sale In Missouri
Your nationwide no-reserve equipment auction. Purple Wave - Straight. Simple. Sold.
Register Now!No Drills and Drilling Rigs For Sale In Missouri at the moment,to get notified when new inventory arrives
Recommended For You
NJ90482021 Vermeer D24X40 Navigator S3 directional boring unit
Current Bid
$110,000.00
/ 24 Bids
Wichita, KS
7/16/2026 Thursday
2021 Vermeer D24X40 Navigator S3 directional boring unit
- Hours: 1,641 on meter
- Serial: 1VRX200FEM1002464
- Unit #: 57.07L
- John Deere PE4045U123497
- Serial: 4045HFC07
- Displacement: 4.5L
- Cylinders: 4
- Fuel type: Diesel
- Ground drive remote: Wireless
- Water pump
- Drill stems
- On drill: 51
- Drill stem length: 10'
- Diameter: -1"
- Auto rod loader
- Rear hydraulic stabilizers
- Hydraulic stake down
- Width: 16"
- Steel
- Rubber pads
EF12432022 Caterpillar 982 wheel loader
- Hours: 6,642 on meter
- Serial: CAT00982CMK800202
- Caterpillar C13
- Displacement: 12.5L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 4F - 4R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Bucket controls: Joystick
- Auto lube
- Bucket
- Caterpillar 982
- Capacity: 8 cu.yd.
- Width: 141"
- Cutting edge: Bolt-on
- Size: 875/65R29
- Glass cracked
NA93892009 Caterpillar D6T LGP cable plow
- Hours: 33,541 on meter
- Serial: KJL01018
- Unit #: 57.11L
- Caterpillar C9
- Serial: THX21902
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 3F - 3R
- Enclosed cab
- AC, Heat
- Steering: Differential
- Attachments
- Plow
- 2021 Bron V100
- Vibratory
- Depth: 63"
- Front cable reel
- Plow
- Width: 24"
- Grouser pads: Single
- Bottom rollers: 8
- Additional cable plow components included
- Undercarriage inspection documents available upon request to [email protected]
- Rebuild completed at 31,919 hours including:
- Undercarriage replaced
- Harnesses replaced
- Lines and hoses replaced
- O-rings replaced
- Pivot bar rebuilt
- Equalizer bar rebuilt
- Final drives rebuilt
- Blade rebuilt
- Cylinders rebuilt
- Engine rebuilt
- Transmission rebuilt
- Torque converter rebuilt
- Hydraulic pumps rebuilt
- Steering pump and valves rebuilt
- Track frames rebuilt
- Cab rebuilt
YA35942024 Komatsu D39PX dozer
- Hours: 66 on meter
- Serial: KMT0D130CPA101616
- Unit #: 53933376
- Komatsu
- Fuel type: Diesel
- Hydrostatic
- Enclosed cab
- AC, Heat
- Backup camera
- Electronic Monitoring System panel
- Steering: Joystick
- Dozer blade
- Blade type: 6-way
- Blade shape: Straight
- Width: 10' 8"
- Width: 27"
- Grouser pads: Single
- Bottom rollers: 6
- Track guards
YA35812023 Komatsu PC210LC-11 excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 2,385 on meter
- Serial: KMTPC257KNTC81778
- Unit #: 53922686
- Komatsu SAA6D107E-3-A
- Serial: 26761585
- Displacement: 6.7L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Three speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Auxiliary hydraulics
- Boom
- Standard
- Stick
- Stick length: 9' 8"
- Thumb: Hydraulic
- Bucket
- Width: 40"
- Cutting edge: Bolt-on
- Teeth: 6
- Width: 32"
- Steel
- Grouser pads: Triple
Please review REQUIRED REMOVAL INSTRUCTIONS
NA94842012 Caterpillar 740B articulated haul truck
Current Bid
$73,000.00
/ 41 Bids
Wichita, KS
7/16/2026 Thursday
2012 Caterpillar 740B articulated haul truck
- Hours: 8,231 on meter
- Serial: CAT0740BVT4R01116
- Caterpillar C15
- Serial: TXL02107
- Displacement: 15.2L
- Cylinders: 6
- Fuel type: Diesel
- Automatic
- Six wheel drive
- AC, Heat
- Retarder
- Backup camera
- Size: 29.5R25
- Dash warning indicator: Regen
FK02872005 Caterpillar 627G scraper
- Hours: 16,352 on meter
- Serial: CAT0627GPDBZ00290
- Caterpillar C15 Acert
- Cylinders: 6
- Fuel type: Diesel
- Caterpillar C9 Acert
- Serial: DYA02257
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 1R
- Brakes: Air
- Enclosed cab
- AC, Heat
- Bowl capacity: 22 cu.yd.
- Hydraulic lift
- Scraper controls: Joystick
- Rear push block
- Size: 33.25R29
NJ90472008 Caterpillar 953D track loader
- Hours: 4,020 on meter
- Serial: CAT0953DDVLBP00812
- Unit #: EM14
- Caterpillar C6.6
- Serial: C6E09303
- Displacement: 6.6L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Bucket controls: Joystick
- Bucket
- Caterpillar
- Width: 96"
- Four-in-one
- Teeth: 8
- Rear ripper
- Shanks: 3
- Width: 19"
- Grouser pads: Double
- Warning indicator: Tilt Cylinder Position Sensor
YA35822021 Komatsu PC210LC-11 excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 2,777 on meter
- Serial: KMTPC257JTC81177
- Unit #: 53923186
- Komatsu SAA6D107E-3-A
- Serial: 26714990
- Displacement: 6.7L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Three speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Pattern changer
- Auxiliary hydraulics
- Boom
- Standard
- Stick
- Stick length: 9' 8"
- Quick coupler: Hydraulic
- JRB
- Bucket
- Hensley 157
- Width: 51"
- Cutting edge: Weld-on
- Width: 32"
- Steel
- Grouser pads: Triple
Please review REQUIRED REMOVAL INSTRUCTIONS
YA35782021 Komatsu PC170LC-11 excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 3,838 on meter
- Serial: KMTPC269CLC035979
- Unit #: 53919216
- Komatsu SAA4D107E-3
- Serial: 26733333
- Displacement: 4.5L
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Pattern changer
- Auxiliary hydraulics
- Boom
- Standard
- Stick
- Stick length: 8' 8"
- Thumb: Hydraulic
- Bucket
- Width: 44"
- Cutting edge: Bolt-on
- Teeth: 5
- Width: 27"
- Steel
- Grouser pads: Triple
Please review REQUIRED REMOVAL INSTRUCTIONS
ET12262014 K-TEC 1233 scraper
- Serial: KS2383
- Hydraulic lift
- Rear push block
- Hitch: Scraper
- Size: 26.5R25
YA35752023 Komatsu PC170LC-11 excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 4,104 on meter
- Serial: KMTPC269KNC036377
- Unit #: 53914146
- Komatsu SAA4D107E-3
- Serial: 26764832
- Displacement: 4.5L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Pattern changer
- Auxiliary hydraulics
- Stick
- Stick length: 8' 8"
- Thumb: Hydraulic
- Bucket
- Width: 40"
- Cutting edge: Bolt-on
- Teeth: 5
- Width: 27"
- Steel
- Grouser pads: Triple
Please review REQUIRED REMOVAL INSTRUCTIONS
YA35772021 Komatsu PC170LC-11 excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 3,350 on meter
- Serial: KMTPC269TMC036035
- Unit #: 53918056
- Komatsu SAA4D107E-3
- Serial: 26738118
- Displacement: 4.5L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Two speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Pattern changer
- Auxiliary hydraulics
- Boom
- Standard
- Stick
- Stick length: 8' 8"
- Thumb: Hydraulic
- Bucket
- Width: 43"
- Cutting edge: Bolt-on
- Teeth: 5
- Width: 27"
- Steel
- Grouser pads: Triple
Please review REQUIRED REMOVAL INSTRUCTIONS
YA35832020 Komatsu PC210LC-11 excavator
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: 5,736 on meter
- Serial: KMTPC257HKTC81090
- Unit #: 53923736
- Komatsu SAA6D1O7E-3-A
- Serial: 26711404
- Displacement: 6.7L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Three speed travel
- Enclosed cab
- AC, Heat
- Backup camera
- Pattern changer
- Auxiliary hydraulics
- Boom
- Standard
- Stick
- Stick length: 9' 8"
- Thumb: Hydraulic
- Bucket
- Width: 51"
- Cutting edge: Bolt-on
- Teeth: 6
- Width: 31"
- Grouser pads: Triple
Please review REQUIRED REMOVAL INSTRUCTIONS
FM75392022 John Deere 210GLC excavator
Current Bid
$42,500.00
/ 22 Bids
Colorado Springs, CO
7/16/2026 Thursday
2022 John Deere 210GLC excavator
- Hours: 1,943 on meter
- Serial: 1FF210GXJNF530318
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Enclosed cab
- AC, Heat
- Backup camera
- Auxiliary hydraulics
- Standard
- Boom
- Standard
- Stick
- Stick length: 9'
- Quick coupler: Hydraulic
- JRB MPL R6 JD 2100
- Bucket
- Width: 34"
- Teeth: 5
- Width: 31.5"
- Steel
- Grouser pads: Triple
- backup camera
- 2 speed travel
21 Results
Auction Date
Auction Years
2026, 2025, 2024
Zip Radius
Zip Code
Range
Category
Drills and Drilling Rigs
Make
Model
Acker
Charles Machine Works Inc.
E-Z Drill
Ingersoll Rand
JRC
Milwaukee
Sandvik
Simco
Year
Minimum Year
Maximum Year
City
Missouri
Current Bid
Sort by
Current Bid (9-0)
30 / page
DW33732018 Sandvik Pantera DP1100i top hammer drill
Contract Price
$47,300.00
Capital Equipment LLC.
Linn Creek, MO
8/14/2025 CLOSED
2018 Sandvik Pantera DP1100i top hammer drill
- Engine hours: 10,375 on meter
- Percussion hours: 4,583 on meter
- Drilling hours: 4,418 on meter
- Compressor hours: 6,858 on meter
- Unit #: 74.601700
- Caterpillar C9.3
- Serial: CS901613
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Speed: 2
- AC, Heat
- Drill bit width: 4"
- Drill bit stems
- Total length: 14'
- (2) 2.25� diameter stems
- Sandvik DO1550N dust control system
- Serial: G021349
- Width: 15.75"
- Steel
FG00562000 Simco 4000 TR-2 drilling rig
- Hours: 87 on meter
- Serial: 001784
- Unit #: G8690
- Deutz F4L912
- Displacement: 3.77L
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Bed/ drill
- Simco
- Engine
- Mast height: 20'
- Drill bit stems
- Pump
- Moyno 3L6 CDQ
- Width: 18"
- Rubber
- Hydraulic leak
- Track pad issues
- Jump start required during on-site data collection
EO41811997 Ingersoll Rand ECM690 drilling Rig
Contract Price
$10,780.00
Sams Drilling Service Inc
Seligman, MO
5/21/2026 CLOSED
1997 Ingersoll Rand ECM690 drilling Rig
- Hours: 9,138 on meter
- Actual hours unknown
- Serial: R16057BE
- Caterpillar 3306B DI
- Serial: 63Z07951
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Drill bit width: 3.5"
- (6) drill stems: 12' L
- Diameter: 2"
- (1) 14' L
- Diameter: 2"
- T51 rods 12' L
- YH135 drifter drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Glass cracked
- AC issues, needs charged
- Warning indicator: Red temperature light
EO41821996 Ingersoll Rand CM695D drilling rig
Contract Price
$9,460.00
Sams Drilling Service Inc
Seligman, MO
5/21/2026 CLOSED
1996 Ingersoll Rand CM695D drilling rig
- Hours: 10,565 on meter
- Actual hours unknown
- Serial: R18017AD
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Down hole hammer drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Rear doors will be installed prior to auction close
- Door latch issues
- Glass cracked
- Dust collector hoses need replaced
- Drill stems not included
- Warning indicator: High hydraulic oil temp
- Oil leak
- Engine shut off issues, must be shut off at fuel solenoid
EO41831990 Ingersoll Rand ECM690/YH100 drilling rig
Contract Price
$8,140.00
Sams Drilling Service Inc
Seligman, MO
5/21/2026 CLOSED
1990 Ingersoll Rand ECM690/YH100 drilling rig
- Hours: 19,317 on meter
- Actual hours unknown
- Serial: B15005BR
- Unit #: 99
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Engine
- Drill bit stems
- Total length: 12'
- Diameter: 2"
- Drill bit stems
- YH100 drifter
- T51 rod length: 12�
- Dust collector system
- Water suppression system
- Width: 14�"
- Steel
- Engine rebuilt October 2021
- Glass cracked
- Air system diaphragm issues, will be repaired prior to auction
- Extendable boom cylinder issues, seals need replaced
- Dust collector hoses need replaced
- Unknown operating condition of HVAC system
EO41802001 Ingersoll Rand CM695D drilling rig
Contract Price
$7,700.00
Sams Drilling Service Inc
Seligman, MO
5/21/2026 CLOSED
2001 Ingersoll Rand CM695D drilling rig
- Hours: 10,746 on meter
- Actual hours unknown
- Serial: G18089BJ
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Dust collection system
- Water suppression system
- Down hole hammer drill
- Width: 14"
- Steel
- Glass cracked
- Drill stems not included
- Dust collection hoses, needs replaced
- Warning indicator: Red temp, pressure lights
OJ9089Rock auger bits
Contract Price
$2,200.00
Consolidated Electric Services
Lebanon, MO
12/19/2024 CLOSED
Rock auger bits
- (7) 18" rock bits
- (3) 16" barrel rock bits
- (2) 9" rock bits
DV1867Acker PT-22 core drill trailer
Contract Price
$1,815.00
Hardy Holding Group
Pilot Grove, MO
4/24/2025 CLOSED
Acker PT-22 core drill trailer
Transfer of ownership documentation will be a bill of sale.
- Hours: 0.1 on meter
- Actual hours unknown
- Serial: 6279RE
- Wisconsin TJD
- Serial: 5546527
- Cylinders: 2
- Fuel type: Gas
- Manual
- 4F - 1R
- Bit: 4.5"
- Remco Pump
- Size: ST225/75R15
- Non-operational hour meter
- Dead Battery
- Hydraulic hoses, dry rotted
- Front landing gear issues
Transfer of ownership documentation will be a bill of sale.
EM71631996 Charles Machine Works Inc. FP22 vertical drill rig
Contract Price
$1,815.00
Gary Sisk Drilling
Odessa, MO
5/22/2025 CLOSED
1996 Charles Machine Works Inc. FP22 vertical drill rig
- Hours: 1,429 on meter
- VIN: 6N0422
- Kohler
- Cylinders: 2
- Fuel type: Gas
- Hydrostatic
- Width: 9"
- Steel
- Dead battery
- Unknown operating condition
EF1586(28) concrete core drill bits
- 18"
- 14"
- 11"
- 10"
- 9"
- 8"
- (2) 6"
- (2) 5"
- (3) 3"
- (2) 2.5"
- 2"
- 1.5"
- (5) 1" and more
- Additional imaged bits not included
EF1587(22) core drills bits
- 16" bit
- (2) 12" bits
- 10" bit
- 8" bit
- (2) 7" bits
- 6.5" bit
- (3) 6" bits
- 5.5" bit
- (2) 5" bit
- (2) 4"bit
- 3.5"bit
- 2" bit
- 2.5" bit
- 2" bit
- 4" bit
- Unused
- Additional imaged bits not included
EQ6522(2) core drills
Contract Price
$1,100.00
J&N Utilities, Inc. Retirement Auction - Open Inspection March 21 and 26
Blue Springs, MO
3/27/2025 CLOSED
(2) core drills
- Bit diameters:
- 2"-12"
EJ5943Milwaukee Dymoll Drill core drill
Contract Price
$687.50
Morrison Trucking LLC
Neosho, MO
3/28/2024 CLOSED
Milwaukee Dymoll Drill core drill
- Serial: 841B31M80016
- Milwaukee
- Volts: 120
- Phase: Single
- Concrete bore drill
- (3) diamond tip bits
- (2) 24" diameter
- 6" diameter
- Bit needs refurbished
DR7651E-Z Drill 210 core drill
Contract Price
$522.50
Realm Construction, Inc.
Blue Springs, MO
1/18/2024 CLOSED
E-Z Drill 210 core drill
- Serial: L1621
- Pneumatic operated
EO4128(2) 18" core barrels
Contract Price
$143.00
Southwest Electric Cooperative, Inc
Bolivar, MO
4/23/2026 CLOSED
(2) 18" core barrels
Recently Sold
EO41811997 Ingersoll Rand ECM690 drilling Rig
- Hours: 9,138 on meter
- Actual hours unknown
- Serial: R16057BE
- Caterpillar 3306B DI
- Serial: 63Z07951
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Drill bit width: 3.5"
- (6) drill stems: 12' L
- Diameter: 2"
- (1) 14' L
- Diameter: 2"
- T51 rods 12' L
- YH135 drifter drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Glass cracked
- AC issues, needs charged
- Warning indicator: Red temperature light
EO41831990 Ingersoll Rand ECM690/YH100 drilling rig
- Hours: 19,317 on meter
- Actual hours unknown
- Serial: B15005BR
- Unit #: 99
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Engine
- Drill bit stems
- Total length: 12'
- Diameter: 2"
- Drill bit stems
- YH100 drifter
- T51 rod length: 12�
- Dust collector system
- Water suppression system
- Width: 14�"
- Steel
- Engine rebuilt October 2021
- Glass cracked
- Air system diaphragm issues, will be repaired prior to auction
- Extendable boom cylinder issues, seals need replaced
- Dust collector hoses need replaced
- Unknown operating condition of HVAC system
EO41821996 Ingersoll Rand CM695D drilling rig
- Hours: 10,565 on meter
- Actual hours unknown
- Serial: R18017AD
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Down hole hammer drill
- Dust collector system
- Water suppression system
- Width: 14"
- Steel
- Rear doors will be installed prior to auction close
- Door latch issues
- Glass cracked
- Dust collector hoses need replaced
- Drill stems not included
- Warning indicator: High hydraulic oil temp
- Oil leak
- Engine shut off issues, must be shut off at fuel solenoid
EO41802001 Ingersoll Rand CM695D drilling rig
- Hours: 10,746 on meter
- Actual hours unknown
- Serial: G18089BJ
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- AC, Heat
- Dust collection system
- Water suppression system
- Down hole hammer drill
- Width: 14"
- Steel
- Glass cracked
- Drill stems not included
- Dust collection hoses, needs replaced
- Warning indicator: Red temp, pressure lights
FG00562000 Simco 4000 TR-2 drilling rig
- Hours: 87 on meter
- Serial: 001784
- Unit #: G8690
- Deutz F4L912
- Displacement: 3.77L
- Cylinders: 4
- Fuel type: Diesel
- Hydrostatic
- Bed/ drill
- Simco
- Engine
- Mast height: 20'
- Drill bit stems
- Pump
- Moyno 3L6 CDQ
- Width: 18"
- Rubber
- Hydraulic leak
- Track pad issues
- Jump start required during on-site data collection
DW33732018 Sandvik Pantera DP1100i top hammer drill
Contract Price
$47,300.00
Linn Creek, MO
8/14/2025 CLOSED
2018 Sandvik Pantera DP1100i top hammer drill
- Engine hours: 10,375 on meter
- Percussion hours: 4,583 on meter
- Drilling hours: 4,418 on meter
- Compressor hours: 6,858 on meter
- Unit #: 74.601700
- Caterpillar C9.3
- Serial: CS901613
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Hydrostatic
- Speed: 2
- AC, Heat
- Drill bit width: 4"
- Drill bit stems
- Total length: 14'
- (2) 2.25� diameter stems
- Sandvik DO1550N dust control system
- Serial: G021349
- Width: 15.75"
- Steel
EF1586(28) concrete core drill bits
- 18"
- 14"
- 11"
- 10"
- 9"
- 8"
- (2) 6"
- (2) 5"
- (3) 3"
- (2) 2.5"
- 2"
- 1.5"
- (5) 1" and more
- Additional imaged bits not included
EF1587(22) core drills bits
- 16" bit
- (2) 12" bits
- 10" bit
- 8" bit
- (2) 7" bits
- 6.5" bit
- (3) 6" bits
- 5.5" bit
- (2) 5" bit
- (2) 4"bit
- 3.5"bit
- 2" bit
- 2.5" bit
- 2" bit
- 4" bit
- Unused
- Additional imaged bits not included
EM71631996 Charles Machine Works Inc. FP22 vertical drill rig
Contract Price
$1,815.00
Odessa, MO
5/22/2025 CLOSED
1996 Charles Machine Works Inc. FP22 vertical drill rig
- Hours: 1,429 on meter
- VIN: 6N0422
- Kohler
- Cylinders: 2
- Fuel type: Gas
- Hydrostatic
- Width: 9"
- Steel
- Dead battery
- Unknown operating condition
DV1867Acker PT-22 core drill trailer
Transfer of ownership documentation will be a bill of sale.
- Hours: 0.1 on meter
- Actual hours unknown
- Serial: 6279RE
- Wisconsin TJD
- Serial: 5546527
- Cylinders: 2
- Fuel type: Gas
- Manual
- 4F - 1R
- Bit: 4.5"
- Remco Pump
- Size: ST225/75R15
- Non-operational hour meter
- Dead Battery
- Hydraulic hoses, dry rotted
- Front landing gear issues
Transfer of ownership documentation will be a bill of sale.
EQ6522(2) core drills
- Bit diameters:
- 2"-12"
Ready to Buy or Sell Drills and Drilling Rigs In Missouri?
Join countless satisfied customers who helped us achieve 400,000+ successful equipment transactions in the last decade!
Browse more options for Drills and Drilling Rigs In Missouri
Looking for more options? Explore the links below to find the match for your needs.
