Graders For Sale Near Victoria, TX
Your nationwide no-reserve equipment auction. Purple Wave - Straight. Simple. Sold.
Register Now!8 Results
Auction Date
Zip Radius
Zip Code
Range
Category
Graders
Make
Model
Caterpillar
Champion
John Deere
Year
Minimum Year
Maximum Year
State
City
Oklahoma
Texas
Current Bid
Sort by
Nearest To City
30 / page
ED53442013 John Deere 772GP motor grader
Current Bid
$12.50
/ 2 Bids
Corso Machinery, LLC
Pharr, TX
7/16/2026 Thursday
2013 John Deere 772GP motor grader
- Hours: 7,618 on meter
- Serial: 1DW772GPLCE649585
- John Deere 6090
- Serial: RG6090R036529
- Displacement: 9.0L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 5
- Size: 17.5R25
- Warning indicator: Rear cab cnr lts open circuit, Frt cab cnr lts open circuit, Axle oil filter switch short to power, Water in fuel open or short, Exhaust gas out of range, Engine derate active, Engine coolant low level
EU06821999 Champion 720A motor grader
Current Bid
$10.00
/ 1 Bids
Streamline Productions
Village Mills, TX
7/30/2026 Thursday
1999 Champion 720A motor grader
- Hours: 4,245 on meter
- Serial: 030064
- Cummins C8.3
- Displacement: 8.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Side shift
- Moldboard total width: 14'
- Size: 14.00-24
- Brand: Primex/Solideal
- Non-operational engine
- Non-operational unit
ET00071981 John Deere 670A motor grader
Current Bid
$10.00
/ 1 Bids
Wood County, TX
Holly Lake Ranch, TX
7/21/2026 Tuesday
1981 John Deere 670A motor grader
- Hours: 31 on meter
- Hours: Actual unknown
- Serial: 10144T
- Unit #: 9566
- John Deere 6414TT
- Serial: 547193
- Displacement: 414 C.I.D.
- Cylinders: 6
- Fuel type: Diesel
- HP: 125
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- Heat
- Steering: Combination
- Hydraulic control valves: 6
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Make: John Deere
- Scarifier type: Front-mounted
- Teeth: 4
- Size: 14.00-24
EU57061971 Caterpillar 14E rigid frame motor grader
Current Bid
$775.00
/ 6 Bids
Belt Construction, LLC
Ardmore, OK
7/16/2026 Thursday
1971 Caterpillar 14E rigid frame motor grader
- Hours: 1,890 on meter
- Serial: 72G696
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Enclosed cab
- Heat
- Hydraulic control valves: 7
- Moldboard: Side shift
- Moldboard total width: 13'
- Size: 14.00R24
- Glass broken
- Front windows removed but included
EW03112016 John Deere 672G motor grader
Current Bid
$20,500.00
/ 18 Bids
Jackson County Oklahoma
Altus, OK
7/07/2026 Tuesday
2016 John Deere 672G motor grader
- Hours: 9,415 on meter
- Serial: 1DW672GXEGF674288
- John Deere 6090HDW28
- Serial: RG6090U026142
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 6
- Scarifier type: Front-mounted
- Size: 17.5R25
FB6776Motor grader scarifier attachment
Current Bid
$0.00
/ 0 Bids
Turkey Creek HDD, Inc
Amarillo, TX
7/16/2026 Thursday
Motor grader scarifier attachment
Features
Features
- Type: Mid-mounted
- Teeth: 6
- Removed from a Caterpillar 140H motor grader
FI02041996 Caterpillar 14H motor grader
Current Bid
$12,000.00
/ 29 Bids
Sherwood Construction Company
Owasso, OK
7/02/2026 Thursday
1996 Caterpillar 14H motor grader
- Hours: Unknown
- Serial: 7WJ00287
- Unit #: 78.79
- Caterpillar 3306
- Serial: 0BZ92629
- Displacement: 10.5L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- OROPS
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Ripper shanks: 5
- Size: 20.5R25
- Non-operational hour meter
FB67321991 John Deere 770B-H motor grader
Current Bid
$7,500.00
/ 18 Bids
Turkey Track Ranch
Stinnett, TX
7/02/2026 Thursday
1991 John Deere 770B-H motor grader
- Hours: 17,095 on meter
- Serial: DW770BH532370
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 17.5-25
- Possible head gasket issue, leaks
Newly Listed
ET00071981 John Deere 670A motor grader
- Hours: 31 on meter
- Hours: Actual unknown
- Serial: 10144T
- Unit #: 9566
- John Deere 6414TT
- Serial: 547193
- Displacement: 414 C.I.D.
- Cylinders: 6
- Fuel type: Diesel
- HP: 125
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- Heat
- Steering: Combination
- Hydraulic control valves: 6
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Make: John Deere
- Scarifier type: Front-mounted
- Teeth: 4
- Size: 14.00-24
EU06821999 Champion 720A motor grader
- Hours: 4,245 on meter
- Serial: 030064
- Cummins C8.3
- Displacement: 8.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Side shift
- Moldboard total width: 14'
- Size: 14.00-24
- Brand: Primex/Solideal
- Non-operational engine
- Non-operational unit
ED53442013 John Deere 772GP motor grader
- Hours: 7,618 on meter
- Serial: 1DW772GPLCE649585
- John Deere 6090
- Serial: RG6090R036529
- Displacement: 9.0L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 5
- Size: 17.5R25
- Warning indicator: Rear cab cnr lts open circuit, Frt cab cnr lts open circuit, Axle oil filter switch short to power, Water in fuel open or short, Exhaust gas out of range, Engine derate active, Engine coolant low level
FB6776Motor grader scarifier attachment
Features
Features
- Type: Mid-mounted
- Teeth: 6
- Removed from a Caterpillar 140H motor grader
EU57061971 Caterpillar 14E rigid frame motor grader
Current Bid
$775.00
/ 6 Bids
Ardmore, OK
7/16/2026 Thursday
1971 Caterpillar 14E rigid frame motor grader
- Hours: 1,890 on meter
- Serial: 72G696
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Enclosed cab
- Heat
- Hydraulic control valves: 7
- Moldboard: Side shift
- Moldboard total width: 13'
- Size: 14.00R24
- Glass broken
- Front windows removed but included
EW03112016 John Deere 672G motor grader
- Hours: 9,415 on meter
- Serial: 1DW672GXEGF674288
- John Deere 6090HDW28
- Serial: RG6090U026142
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 6
- Scarifier type: Front-mounted
- Size: 17.5R25
FB67321991 John Deere 770B-H motor grader
- Hours: 17,095 on meter
- Serial: DW770BH532370
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 17.5-25
- Possible head gasket issue, leaks
FI02041996 Caterpillar 14H motor grader
- Hours: Unknown
- Serial: 7WJ00287
- Unit #: 78.79
- Caterpillar 3306
- Serial: 0BZ92629
- Displacement: 10.5L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- OROPS
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Ripper shanks: 5
- Size: 20.5R25
- Non-operational hour meter
Recommended For You
EF12422019 Caterpillar 120 motor grader
- Hours: 5,814 on meter
- Serial: CAT00120VY9C00250
- Caterpillar C7.1 Acert
- Displacement: 7.01L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 11
- Scarifier type: Mid-mounted
- Size: 17.5R25
- Jump start required during on-site data collection
FH61641999 Lee Boy 685 motor grader
- Hours: 515 on meter
- Serial: 342
- Cummins B3.9-C
- Displacement: 3.9L
- Cylinders: 4
- Fuel type: Diesel
- Direct-drive
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 10'
- Scarifier
- Scarifier type: Mid-mounted
- Size: 15-19.5
- One blade shift cylinder leaks
DV43801975 Caterpillar 12G motor grader
- Hours: 409 on meter
- Serial: 61M2281
- Caterpillar 3306PC
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Differential lock
- OROPS
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Blade accumulators
- Front: 14.00-24
EW20831985 John Deere 770A motor grader
- Hours: 9,066 on meter
- Serial: DW770AX506914
- John Deere
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Heat
- Hydraulic control valves: 2
- Moldboard: Side shift
- Moldboard total width: 13' 11"
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 3
- Scarifier type: Front-mounted
- Size: 14.00-24
- Hydraulic fluid leak
ND9488Fiat Allis FG65C motor grader
- Hours: 2,156 on meter
- Serial: 85S05171
- New Holland 73161241
- Serial: 602145
- Cylinders: 4
- Fuel type: Diesel
- Powershift
- 6F - 4R
- Hydraulic control valves: 8
- Moldboard: Side shift
- Moldboard total width: 10'
- Front-mounted push block
- Size: 15-19.5
- Warning indicator: Battery Light
- Possible transmission issues, will not shift into gear
EV2236Caterpillar 212 motor grader
- Hours: 845 on meter
- Serial: 9T1103
- Caterpillar
- Cylinders: 4
- Fuel type: Diesel
- Pony motor
- Direct-drive
- Enclosed cab
- Hydraulic control valves: 5
- Moldboard total width: 12'
- Front: 9.00-20
- Rear: 10.00-24
- Brake issues
- Glass cracked
EW21001992 Dresser 850 motor grader
- Hours: 12,456 on meter
- Serial: G580009U200100
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 3R
- Enclosed cab
- Heat
- Hydraulic control valves: 13
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 2
- Scarifier type: Mid-mounted
- Rear ripper
- American Tractor Equipment Corp. HR-160L
- Scarifier teeth: 3
- Front: 14.00R24
- Rear: 14.00-24
- Glass cracked
FC31131972 Fiat-Allis M65 motor grader
- Hours: 8,997 on meter
- Serial: 24A00728
- Cylinders: 6
- Fuel type: Diesel
- Direct-drive
- 4F - 4R
- Hydraulic control valves: 7
- Moldboard: Side shift
- Moldboard total width: 10'
- Size: 8.25-20
- Jump start required during on-site data collection
- Hydraulic cylinder leaks
- Transmission issues, reverse does not engage
FC31942008 Volvo G940 motor grader
- Hours: 2,441 on meter
- Serial: VCE0G940J00042178
- Unit #: 19735
- Volvo D7E GBE3
- Serial: 11089662
- Displacement: 7.145
- Cylinders: 6
- Fuel type: Diesel
- HP: 221
- Powershift
- 5F - 4R
- OROPS
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 9
- Size: 17.5R25
EF12351988 Galion A550 motor grader
- Hours: 4,245 on meter
- Serial: G310002U100413
- Unit #: 13719
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 4F - 1R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 11
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Hydraulic leaks
NA9421Allis Chalmers AD-40 rigid frame motor grader
Current Bid
$12.50
/ 2 Bids
Pratt, KS
7/02/2026 Thursday
Allis Chalmers AD-40 rigid frame motor grader
- Hours: 8,195 on meter
- Serial: 5270
- Cylinders: 4
- Fuel type: Diesel
- Direct-drive
- Heat
- Hydraulic control valves: 7
- Moldboard total width: 11' 11"
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 4
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Cab removed but included
- Glass missing
- Non-operational engine, locked up
- Batteries missing
- Tires damaged
- Non-operational unit
NA94201961 Galion 118 rigid frame motor grader
- Serial: 4125
- Cylinders: 4
- Fuel type: Diesel
- Direct-drive
- Enclosed cab
- Heat
- Hydraulic control valves: 7
- Moldboard: Side shift
- Moldboard total width: 12' 11"
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 4
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Glass cracked
- Batteries missing
- Cab glass missing
- Non-operational engine, locked up
- Tires damaged
- Non-operational unit
FC31351984 Champion D-565T motor grader
- Hours: 3,733 on meter
- Serial: 73.565TC.01.6136.
- Cummins H743C160
- Serial: 68128
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 3F - 3R
- Enclosed cab
- Heat
- Hydraulic control valves: 11
- Moldboard: Tip control, Side shift
- Moldboard total width: 13'
- Scarifier
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Glass cracked
- Jump start required during on-site data collection
- Hydraulic leak
Recently Sold
EV29731999 Caterpillar 140H motor grader
- Hours: 18,533 on meter
- Serial: 9TN00915
- Caterpillar 3306
- Serial: 6NC10798
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 17.5R25
ET62451977 John Deere 570-A motor grader
- Hours: 4,353 on meter
- Serial: 004701T
- John Deere 6329CT 03
- Serial: 395739T
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 7
- Scarifier type: Front-mounted
- Front: 13.00-24
- Hydraulic cylinder leak
- Flat tire
YA30352001 Caterpillar 140H motor grader
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: Unknown
- Serial: 2ZK06004
- Unit #: 48414296
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 4
- Size: 14.00-24
- Flat tires
- Non-operational unit
Please review REQUIRED REMOVAL INSTRUCTIONS
EW01022008 John Deere 772D motor grader
- Hours: 3,549 on meter
- Serial: DW772DX616039
- John Deere 6081HDW13
- Serial: RG6081H299720
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 12
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- John Deere
- Ripper shanks: 3
- Size: 17.5R25
YA27831972 Caterpillar 12F rigid frame motor grader
Contract Price
$4,730.00
Oklahoma City, OK
6/04/2026 CLOSED
1972 Caterpillar 12F rigid frame motor grader
Please review REQUIRED REMOVAL INSTRUCTIONS
- Hours: Unknown
- Serial: 89H1333
- Unit #: 42018576
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- OROPS
- Heat
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 5
- Scarifier type: Mid-mounted
- Front: 13.00-24TG
- Rear: 18.4-26
- Glass cracked
- Dead battery
- Hour meter damaged
- Parts may be missing
- Flat tires
- Hydraulic leaks
- Rodent damage
- Possible electric issues
- Non-operational unit
Please review REQUIRED REMOVAL INSTRUCTIONS
ES89342021 Caterpillar 150 motor grader
- Hours: 6,084 on meter
- Serial: CAT00150KEB400425
- Unit #: 08-0073
- Caterpillar C9.3
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 5F - 3R
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted push block
- Rear ripper
- Ripper shanks: 5
- Front: 17.5R25
- Repairs & maintenance performed by local Caterpillar dealer through the TM&R plan
- Wired for Trimble Earthworks GPS
FH6620Balderson BLQ12 motor grader lifting group
- Serial: 12732
- Hydraulic lines missing
- Unknown operating condition
EU74201964 Caterpillar 112F rigid frame motor grader
Contract Price
$3,850.00
Friendswood, TX
4/28/2026 CLOSED
1964 Caterpillar 112F rigid frame motor grader
- Serial: 82F692
- Cylinders: 4
- Fuel type: Diesel
- Direct-drive
- Hydraulic control valves: 6
- Moldboard: Side shift
- Moldboard total width: 12'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 9
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Jump start required during on-site data collection
- Unknown operating condition
NK91191983 John Deere 570A motor grader
- Hours: 3,108 on meter
- Serial: DW570AX406439
- John Deere 4276
- Displacement: 5.4L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 1
- Scarifier type: Front-mounted
- Size: 15.5-25
- Jump start required during on-site data collection
- Hydraulic hose issues, leaks
- Door latch issues, difficult to shut
- Valve stem issue, leaks
EV28331974 Champion 715 rigid frame motor grader
- Hours: Unknown
- Serial: 715-14-198-0659-2
- Detroit Diesel
- Cylinders: 4
- Fuel type: Diesel
- Powershift
- Enclosed cab
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 3
- Scarifier type: Mid-mounted
- Size: 14.00-24TG
- Jump start required during on-site data collection
- Glass broken
- Hour meter damaged
- Ignition issues, requires jump start
- Non-operational doors, will not close
- Scarifier hydraulic cylinder leaks, seal needs replaced
- Non-operational brakes
ED51792000 New Holland RG170 motor grader
- Hours: Unknown
- Serial: 11M00155
- Cummins 6CT8.3
- Displacement: 8.3L
- Cylinders: 6
- Fuel type: Diesel
- HP: 170
- kW: 127
- Powershift
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Ripper shanks: 5
- Size: 17.5R25
- Glass missing
- Non-operational door latch
- Wheel tilt issues
- Warning indicator: Transmission
- Glass cracked
DR09852012 Caterpillar 140M2 motor grader
- Hours: 13,109 on meter
- Serial: CAT0140MKM9D00830
- Caterpillar C9.3
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 7
- Front: 14.00R24
- Brand: Galaxy MGSR200
- Emissions system modified
- DPF deleted, DEF deleted, EGR deleted
ET14701993 Fiatallis 65-B rigid frame motor grader
Contract Price
$15,950.00
Ratliff City, OK
4/09/2026 CLOSED
1993 Fiatallis 65-B rigid frame motor grader
- Hours: 7,658 on meter
- Serial: 68G04477
- Fiat 774752
- Serial: 016610
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- OROPS
- Steering: Combination
- Moldboard: Side shift
- Moldboard total width: 10'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 6
- Scarifier type: Mid-mounted
- Size: 15-19.5
Ready to Buy or Sell Graders?
Join countless satisfied customers who helped us achieve 400,000+ successful equipment transactions in the last decade!
Browse More Options
Looking for more options$1 Explore the below links to find the match for your needs.
