Motor Grader For Sale Near Kyle, TX
Your nationwide no-reserve equipment auction. Purple Wave - Straight. Simple. Sold.
Register Now!7 Results
Auction Date
Zip Radius
Zip Code
Range
Make
Model
Caterpillar
John Deere
Year
Minimum Year
Maximum Year
State
City
Kansas
Oklahoma
Texas
Current Bid
Sort by
Nearest To City
30 / page
ED53542007 John Deere 770D motor grader
Current Bid
$25,500.00
/ 18 Bids
Barr G Equipment
Longview, TX
8/13/2026 Thursday
2007 John Deere 770D motor grader
- Hours: 2,500 on ECM
- Serial: DW770DX614280
- John Deere 6081
- Serial: RG6081H298704
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Size: 17.5R25
- Dash electrical issue
- Steering column issues, does not lock in place
EW85002005 John Deere 670D motor grader
Current Bid
$8,600.00
/ 13 Bids
Okfuskee County
Paden, OK
8/18/2026 Tuesday
2005 John Deere 670D motor grader
- Hours: 6,460 on meter
- Serial: DW670DX599732
- John Deere
- Serial: SE6068Z008583
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Scarifier
- Scarifier type: Front-mounted
- Rear ripper
- Scarifier teeth: 2
- Size: 14.00-24
- Warning indicator: Check diagnostic code
- AC issues, may need recharge
FC25092013 Caterpillar 140M2 AWD motor grader
Current Bid
$18,500.00
/ 22 Bids
Amarillo Machinery
Amarillo, TX
8/13/2026 Thursday
2013 Caterpillar 140M2 AWD motor grader
- Hours: 9,717 on meter
- Serial: CAT014MCM9J00748
- Caterpillar C-9.3
- Serial: MME1112
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted push block
- Rear ripper
- Caterpillar
- Ripper shanks: 3
- Scarifier teeth: 9
- Front: 14.00R24
- Warning indicator: Fuel filter restricted
- Key not included
EW41132009 John Deere 772D motor grader
- Hours: 10,895 on meter
- Serial: DW772DX624111
- Unit #:
- John Deere 6081HDW13
- Serial: RG6081H303693
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 4
- Scarifier type: Front-mounted
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 8
- Size: 14.00R24
- Coolant level sight glass issues, leaks
EW41092007 John Deere 772D motor grader
- Miles: 79,372 on odometer
- Hours: 15,689 on meter
- Serial: DW772DX611980
- Remanufactured John Deere
- Serial: SE6081Z003809
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 14.00R24
EW40421999 Caterpillar 140H motor grader
Current Bid
$40,500.00
/ 20 Bids
Meade County
Meade, KS
8/18/2026 Tuesday
1999 Caterpillar 140H motor grader
- Hours: 14,628 on meter
- Serial: 2ZK04724
- Caterpillar 3306
- Serial: 6NC17718
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 5
- Scarifier teeth: 9
- Size: 14.00R24
- Lift cylinders leak
JM94771999 Caterpillar 140H motor grader
Current Bid
$33,500.00
/ 27 Bids
LB & Sons
El Paso, TX
8/27/2026 Thursday
1999 Caterpillar 140H motor grader
- Hours: 2,263 on meter
- Serial: 2ZK04065
- Caterpillar 3306
- Serial: 6NC12906
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Cat
- Ripper shanks: 3
- Size: 17.5R25
- Intermittent hydraulic oil temp warning light
Newly Listed
EW41092007 John Deere 772D motor grader
- Miles: 79,372 on odometer
- Hours: 15,689 on meter
- Serial: DW772DX611980
- Remanufactured John Deere
- Serial: SE6081Z003809
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 14.00R24
EW41132009 John Deere 772D motor grader
- Hours: 10,895 on meter
- Serial: DW772DX624111
- Unit #:
- John Deere 6081HDW13
- Serial: RG6081H303693
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 4
- Scarifier type: Front-mounted
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 8
- Size: 14.00R24
- Coolant level sight glass issues, leaks
JM94771999 Caterpillar 140H motor grader
- Hours: 2,263 on meter
- Serial: 2ZK04065
- Caterpillar 3306
- Serial: 6NC12906
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Cat
- Ripper shanks: 3
- Size: 17.5R25
- Intermittent hydraulic oil temp warning light
EW40421999 Caterpillar 140H motor grader
- Hours: 14,628 on meter
- Serial: 2ZK04724
- Caterpillar 3306
- Serial: 6NC17718
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 5
- Scarifier teeth: 9
- Size: 14.00R24
- Lift cylinders leak
EW85002005 John Deere 670D motor grader
- Hours: 6,460 on meter
- Serial: DW670DX599732
- John Deere
- Serial: SE6068Z008583
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Scarifier
- Scarifier type: Front-mounted
- Rear ripper
- Scarifier teeth: 2
- Size: 14.00-24
- Warning indicator: Check diagnostic code
- AC issues, may need recharge
FC25092013 Caterpillar 140M2 AWD motor grader
Current Bid
$18,500.00
/ 22 Bids
Amarillo, TX
8/13/2026 Thursday
2013 Caterpillar 140M2 AWD motor grader
- Hours: 9,717 on meter
- Serial: CAT014MCM9J00748
- Caterpillar C-9.3
- Serial: MME1112
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted push block
- Rear ripper
- Caterpillar
- Ripper shanks: 3
- Scarifier teeth: 9
- Front: 14.00R24
- Warning indicator: Fuel filter restricted
- Key not included
ED53542007 John Deere 770D motor grader
- Hours: 2,500 on ECM
- Serial: DW770DX614280
- John Deere 6081
- Serial: RG6081H298704
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Size: 17.5R25
- Dash electrical issue
- Steering column issues, does not lock in place
Recommended For You
FK45522019 Caterpillar 140AWD motor grader
- Hours: 3,005 on meter
- Serial: CAT00140VN9500229
- Caterpillar C9.3
- Serial: SYE33140
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- kW: 130
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Hydraulic control valves: 13
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 3
- Size: 14.00R24
- Jump start required during on-site data collection
ER31862020 Caterpillar 150 motor grader
- Hours: 7,321 on meter
- Serial: CAT00150VEB400204
- Unit #: 64
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00R24
ER31852020 Caterpillar 150 motor grader
- Hours: 8,844 on meter
- Serial: CAT00150JEB400202
- Unit #: 62
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
DN66972012 Caterpillar 140M2 VHP Plus motor grader
Current Bid
$10,500.00
/ 9 Bids
Lincoln, NE
8/27/2026 Thursday
2012 Caterpillar 140M2 VHP Plus motor grader
- Hours: 17,737 on meter
- Serial: CAT0140MEM9J00649
- Unit #: 5099
- Caterpillar C9.3
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14' 2"
- Size: 17.5R25
- AC issues, need recharged
EV60321993 John Deere 770B motor grader
- Hours: 5,874 on meter
- Serial: DW770BX539261
- John Deere
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
EL25662012 John Deere 672GP motor grader
Current Bid
$5,000.00
/ 12 Bids
Casa Grande, AZ
8/27/2026 Thursday
2012 John Deere 672GP motor grader
- Hours: Unknown
- Serial: 1DW672GPPCE644387
- John Deere
- Serial: RG6090R020075
- Cylinders: 6
- Powershift
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted push block
- Rear ripper
- Asbic
- Ripper shanks: 5
- Scarifier teeth: 6
- Size: 17.5-25
- Dead battery
- Fuel pump issues, needs replaced
- Non-operational unit
FM76102012 Caterpillar 140M2 motor grader
- Hours: 9,779 on meter
- Serial: CAT0140MAM9J00663
- Unit #: 385
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 1
- Scarifier teeth: 7
- Size: 385/95R24
- Non-operational AC
FH62931987 Fiatallis 65B rigid frame motor grader
Current Bid
$2,700.00
/ 25 Bids
Topeka, KS
8/27/2026 Thursday
1987 Fiatallis 65B rigid frame motor grader
- Hours: 6,074 on meter
- Serial: 6BC04057
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Enclosed cab
- Hydraulic control valves: 7
- Moldboard total width: 10'
- Front: 255/79r22.5
- Rear: 255/70r22.5
- Non-operational brakes
- Transmission issues, non operational Hi-Lo lever
FT60782000 John Deere 770CH motor grader
- Serial: DW770CH11574586
- Unit #: G9018
- John Deere
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 12
- Moldboard: Tip control, Side shift
- Moldboard total width: 144"
- Front-mounted lift group
- Wing plow: 144"
- Size: 14.00R24
- Spare tire and wheel: 14.00R24
- Intermittent transmission issues, will not always go in gear
- Wing plow removed but included
FM76082008 Caterpillar 160M motor grader
- Hours: 15,644 on meter
- Serial: CAT0160MHB9L00275
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Scarifier teeth: 5
- Rear: 14.00R24
- Possible AC issues, may need charged
FM76092008 Caterpillar 140M motor grader
- Hours: 16,795 on meter
- Serial: CAT0140MPB9M00354
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Rear ripper
- Ripper shanks: 2
- Scarifier teeth: 5
- Size: 14.00R24
- Warning indicator: Glow plug, Secondary steering system failure
- Possible AC issues, may need charged
EW41722006 Komatsu GD655 motor grader
- Hours: 7,670 on meter
- Serial: KMTGD15C01051273
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Scarifier
- Make: Dymax
- Scarifier type: Front-mounted
- Teeth: 9
- Size: 14.00R24
FM76112008 Caterpillar 160M motor grader
- Hours: 13,525 on meter
- Serial: CAT0160MCB9L00277
- Caterpillar C9
- Serial: THX13767
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 11'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Scarifier teeth: 4
- Rear: 14.00R24
- Engine issues, white smoke
- Possible AC issues, may need charged
FM76142001 Caterpillar 143H motor grader
- Hours: 12,486 on meter
- Actual hours unknown
- Serial: 1AL00876
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 13
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Caterpillar
- Ripper shanks: 3
- Snow wing
- Width: 12'
- Size: 14.00R24
- Possible hydraulic system issues
- Non-operational hour meter
ER19621975 Champion 560S motor grader
- Hours: 20,873 on meter
- Detroit Diesel
- Cylinders: 4
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
- Blade hydraulic issues
Recently Sold
EN04521985 Galion A550 motor grader
- Hours: 3,712 on meter
- Serial: ID-C-11313
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 4F - 4R
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Scarifier teeth: 7
- Front: 14.00-24
- Hydraulic leak
FC25022007 Caterpillar 140H VHP Plus motor grader
- Hours: 6,360 on meter
- Serial: CAT0140HCCCA03144
- Caterpillar 3176
- Serial: 3PD18527
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Make: Calderon
- Rear ripper
- Cat
- Ripper shanks: 3
- Scarifier teeth: 6
- Front: 14.00-24TG
- Rear: 14.00-24IND
- Warning indicator: Check engine
EX25382005 Caterpillar 140H motor grader
- Hours: 14,157 on meter
- Serial: CAT0140HPAPM02196
- Caterpillar 3176
- Serial: 3PD13059
- Displacement: 10.3L
- Cylinders: 6
- Fuel type: Diesel
- HP: 185
- kW: 138
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Model: 9W3155
- Ripper shanks: 3
- Front: 17.5R25
EX40132003 Caterpillar 160H motor grader
- Hours: 11,044 on meter
- Serial: CAT0160HEASD00307
- Caterpillar 3176
- Displacement: 10.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 11
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Size: 14.00/24
EU06821999 Champion 720A motor grader
- Hours: 4,245 on meter
- Serial: 030064
- Cummins C8.3
- Displacement: 8.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Side shift
- Moldboard total width: 14'
- Size: 14.00-24
- Brand: Primex/Solideal
- Non-operational engine
- Non-operational unit
ET64472010 John Deere 672G motor grader
- Hours: 6,941 on meter
- Serial: DW672GX626771
- Unit #: 2075
- John Deere 6090HDW01
- Serial: RG6090L068853
- Displacement: 9.0L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Circle slip clutch
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Front: 13.00-24
- Rear: 14.00R24
- Warning indicator: Hydraulic oil filter restricted
ET00071981 John Deere 670A motor grader
- Hours: 31 on meter
- Hours: Actual unknown
- Serial: 10144T
- Unit #: 9566
- John Deere 6414TT
- Serial: 547193
- Displacement: 414 C.I.D.
- Cylinders: 6
- Fuel type: Diesel
- HP: 125
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- Heat
- Steering: Combination
- Hydraulic control valves: 6
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Make: John Deere
- Scarifier type: Front-mounted
- Teeth: 4
- Size: 14.00-24
ED53442013 John Deere 772GP motor grader
- Hours: 7,620 on meter
- Serial: 1DW772GPLCE649585
- John Deere 6090
- Serial: RG6090R036529
- Displacement: 9.0L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 5
- Size: 17.5R25
- Warning indicator: Rear cab cnr lts open circuit, Frt cab cnr lts open circuit
EU57061971 Caterpillar 14E rigid frame motor grader
- Hours: 1,890 on meter
- Serial: 72G696
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Enclosed cab
- Heat
- Hydraulic control valves: 7
- Moldboard: Side shift
- Moldboard total width: 13'
- Size: 14.00R24
- Glass broken
- Front windows removed but included
EW03112016 John Deere 672G motor grader
- Hours: 9,415 on meter
- Serial: 1DW672GXEGF674288
- John Deere 6090HDW28
- Serial: RG6090U026142
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 6
- Scarifier type: Front-mounted
- Size: 17.5R25
NA94201961 Galion 118 rigid frame motor grader
- Serial: 4125
- Cylinders: 4
- Fuel type: Diesel
- Direct-drive
- Enclosed cab
- Heat
- Hydraulic control valves: 7
- Moldboard: Side shift
- Moldboard total width: 12' 11"
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 4
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Glass cracked
- Batteries missing
- Cab glass missing
- Non-operational engine, locked up
- Tires damaged
- Non-operational unit
NA9421Allis Chalmers AD-40 rigid frame motor grader
- Hours: 8,195 on meter
- Serial: 5270
- Cylinders: 4
- Fuel type: Diesel
- Direct-drive
- Heat
- Hydraulic control valves: 7
- Moldboard total width: 11' 11"
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 4
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Cab removed but included
- Glass missing
- Non-operational engine, locked up
- Batteries missing
- Tires damaged
- Non-operational unit
FI02041996 Caterpillar 14H motor grader
- Hours: Unknown
- Serial: 7WJ00287
- Unit #: 78.79
- Caterpillar 3306
- Serial: 0BZ92629
- Displacement: 10.5L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- OROPS
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Ripper shanks: 5
- Size: 20.5R25
- Non-operational hour meter
FB67321991 John Deere 770B-H motor grader
- Hours: 17,095 on meter
- Serial: DW770BH532370
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 17.5-25
- Possible head gasket issue, leaks
EN0452Galion A550 motor grader
- Hours: 3,712 on meter
- Serial: ID-C-11318
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Scarifier teeth: 7
- Front: 14.00-24
- Hydraulic leak
Ready to Buy or Sell Motor Grader?
Join countless satisfied customers who helped us achieve 400,000+ successful equipment transactions in the last decade!