Motor Grader For Sale Near Olathe, KS
Your nationwide no-reserve equipment auction. Purple Wave - Straight. Simple. Sold.
Register Now!15 Results
Auction Date
Zip Radius
Zip Code
Range
Make
Model
Caterpillar
Champion
Fiatallis
John Deere
Komatsu
Year
Minimum Year
Maximum Year
State
City
Kansas
Mississippi
Missouri
Nebraska
Oklahoma
South Dakota
Tennessee
Texas
Current Bid
Sort by
Nearest To City
30 / page
EV60321993 John Deere 770B motor grader
Current Bid
$6,100.00
/ 15 Bids
Scranton Township
Scranton, KS
9/01/2026 Tuesday
1993 John Deere 770B motor grader
- Hours: 5,874 on meter
- Serial: DW770BX539261
- John Deere
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
FH62931987 Fiatallis 65B rigid frame motor grader
Current Bid
$2,700.00
/ 25 Bids
Equi-Venture Farms, LLC
Topeka, KS
8/27/2026 Thursday
1987 Fiatallis 65B rigid frame motor grader
- Hours: 6,074 on meter
- Serial: 6BC04057
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Enclosed cab
- Hydraulic control valves: 7
- Moldboard total width: 10'
- Front: 255/79r22.5
- Rear: 255/70r22.5
- Non-operational brakes
- Transmission issues, non operational Hi-Lo lever
DN66972012 Caterpillar 140M2 VHP Plus motor grader
Current Bid
$10,500.00
/ 9 Bids
Constructors, Inc. / NEBCO, Inc.
Lincoln, NE
8/27/2026 Thursday
2012 Caterpillar 140M2 VHP Plus motor grader
- Hours: 17,737 on meter
- Serial: CAT0140MEM9J00649
- Unit #: 5099
- Caterpillar C9.3
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14' 2"
- Size: 17.5R25
- AC issues, need recharged
EW41722006 Komatsu GD655 motor grader
Current Bid
$625.00
/ 14 Bids
Stafford County
St. John, KS
9/01/2026 Tuesday
2006 Komatsu GD655 motor grader
- Hours: 7,670 on meter
- Serial: KMTGD15C01051273
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Scarifier
- Make: Dymax
- Scarifier type: Front-mounted
- Teeth: 9
- Size: 14.00R24
FT60782000 John Deere 770CH motor grader
Current Bid
$2,050.00
/ 5 Bids
Missouri Department of Transportation - District 6
Ballwin, MO
8/18/2026 Tuesday
2000 John Deere 770CH motor grader
- Serial: DW770CH11574586
- Unit #: G9018
- John Deere
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 12
- Moldboard: Tip control, Side shift
- Moldboard total width: 144"
- Front-mounted lift group
- Wing plow: 144"
- Size: 14.00R24
- Spare tire and wheel: 14.00R24
- Intermittent transmission issues, will not always go in gear
- Wing plow removed but included
EW85002005 John Deere 670D motor grader
Current Bid
$8,600.00
/ 13 Bids
Okfuskee County
Paden, OK
8/18/2026 Tuesday
2005 John Deere 670D motor grader
- Hours: 6,460 on meter
- Serial: DW670DX599732
- John Deere
- Serial: SE6068Z008583
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Scarifier
- Scarifier type: Front-mounted
- Rear ripper
- Scarifier teeth: 2
- Size: 14.00-24
- Warning indicator: Check diagnostic code
- AC issues, may need recharge
EW41132009 John Deere 772D motor grader
- Hours: 10,895 on meter
- Serial: DW772DX624111
- Unit #:
- John Deere 6081HDW13
- Serial: RG6081H303693
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 4
- Scarifier type: Front-mounted
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 8
- Size: 14.00R24
- Coolant level sight glass issues, leaks
EW41092007 John Deere 772D motor grader
- Miles: 79,372 on odometer
- Hours: 15,689 on meter
- Serial: DW772DX611980
- Remanufactured John Deere
- Serial: SE6081Z003809
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 14.00R24
EW40421999 Caterpillar 140H motor grader
Current Bid
$40,500.00
/ 20 Bids
Meade County
Meade, KS
8/18/2026 Tuesday
1999 Caterpillar 140H motor grader
- Hours: 14,628 on meter
- Serial: 2ZK04724
- Caterpillar 3306
- Serial: 6NC17718
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 5
- Scarifier teeth: 9
- Size: 14.00R24
- Lift cylinders leak
ER31852020 Caterpillar 150 motor grader
Current Bid
$20,000.00
/ 8 Bids
Dyer County
Dyersburg, TN
8/27/2026 Thursday
2020 Caterpillar 150 motor grader
- Hours: 8,844 on meter
- Serial: CAT00150JEB400202
- Unit #: 62
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
ER31862020 Caterpillar 150 motor grader
Current Bid
$25,500.00
/ 6 Bids
Dyer County
Dyersburg, TN
8/27/2026 Thursday
2020 Caterpillar 150 motor grader
- Hours: 7,321 on meter
- Serial: CAT00150VEB400204
- Unit #: 64
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00R24
FN20211975 Caterpillar 12G motor grader
Current Bid
$22.50
/ 4 Bids
Lamb Constuction and Equipment
Hernando, MS
8/27/2026 Thursday
1975 Caterpillar 12G motor grader
- Hours: 2,992 on meter
- Serial: 61M2838
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Hydraulic control valves: 9
- Grade control
- Topcon Sonic Tracker 2
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 3
- Scarifier type: Mid-mounted
- Size: 15.5-25
- 2D Sonic Grade control included
- Glass cracked
ED53542007 John Deere 770D motor grader
Current Bid
$25,500.00
/ 18 Bids
Barr G Equipment
Longview, TX
8/13/2026 Thursday
2007 John Deere 770D motor grader
- Hours: 2,500 on ECM
- Serial: DW770DX614280
- John Deere 6081
- Serial: RG6081H298704
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Size: 17.5R25
- Dash electrical issue
- Steering column issues, does not lock in place
FC25092013 Caterpillar 140M2 AWD motor grader
Current Bid
$18,500.00
/ 22 Bids
Amarillo Machinery
Amarillo, TX
8/13/2026 Thursday
2013 Caterpillar 140M2 AWD motor grader
- Hours: 9,717 on meter
- Serial: CAT014MCM9J00748
- Caterpillar C-9.3
- Serial: MME1112
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted push block
- Rear ripper
- Caterpillar
- Ripper shanks: 3
- Scarifier teeth: 9
- Front: 14.00R24
- Warning indicator: Fuel filter restricted
- Key not included
ER19621975 Champion 560S motor grader
- Hours: 20,873 on meter
- Detroit Diesel
- Cylinders: 4
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
- Blade hydraulic issues
Newly Listed
EW41722006 Komatsu GD655 motor grader
- Hours: 7,670 on meter
- Serial: KMTGD15C01051273
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Scarifier
- Make: Dymax
- Scarifier type: Front-mounted
- Teeth: 9
- Size: 14.00R24
ER19621975 Champion 560S motor grader
- Hours: 20,873 on meter
- Detroit Diesel
- Cylinders: 4
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
- Blade hydraulic issues
FN20211975 Caterpillar 12G motor grader
- Hours: 2,992 on meter
- Serial: 61M2838
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Hydraulic control valves: 9
- Grade control
- Topcon Sonic Tracker 2
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Scarifier
- Scarifier type: Mid-mounted
- Teeth: 3
- Scarifier type: Mid-mounted
- Size: 15.5-25
- 2D Sonic Grade control included
- Glass cracked
EV60321993 John Deere 770B motor grader
- Hours: 5,874 on meter
- Serial: DW770BX539261
- John Deere
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
ER31852020 Caterpillar 150 motor grader
- Hours: 8,844 on meter
- Serial: CAT00150JEB400202
- Unit #: 62
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00-24
ER31862020 Caterpillar 150 motor grader
- Hours: 7,321 on meter
- Serial: CAT00150VEB400204
- Unit #: 64
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Size: 14.00R24
EW41092007 John Deere 772D motor grader
- Miles: 79,372 on odometer
- Hours: 15,689 on meter
- Serial: DW772DX611980
- Remanufactured John Deere
- Serial: SE6081Z003809
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 5
- Scarifier type: Front-mounted
- Size: 14.00R24
EW41132009 John Deere 772D motor grader
- Hours: 10,895 on meter
- Serial: DW772DX624111
- Unit #:
- John Deere 6081HDW13
- Serial: RG6081H303693
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 4
- Scarifier type: Front-mounted
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 8
- Size: 14.00R24
- Coolant level sight glass issues, leaks
FH62931987 Fiatallis 65B rigid frame motor grader
Current Bid
$2,700.00
/ 25 Bids
Topeka, KS
8/27/2026 Thursday
1987 Fiatallis 65B rigid frame motor grader
- Hours: 6,074 on meter
- Serial: 6BC04057
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 6F - 6R
- Enclosed cab
- Hydraulic control valves: 7
- Moldboard total width: 10'
- Front: 255/79r22.5
- Rear: 255/70r22.5
- Non-operational brakes
- Transmission issues, non operational Hi-Lo lever
DN66972012 Caterpillar 140M2 VHP Plus motor grader
Current Bid
$10,500.00
/ 9 Bids
Lincoln, NE
8/27/2026 Thursday
2012 Caterpillar 140M2 VHP Plus motor grader
- Hours: 17,737 on meter
- Serial: CAT0140MEM9J00649
- Unit #: 5099
- Caterpillar C9.3
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 14' 2"
- Size: 17.5R25
- AC issues, need recharged
EW40421999 Caterpillar 140H motor grader
- Hours: 14,628 on meter
- Serial: 2ZK04724
- Caterpillar 3306
- Serial: 6NC17718
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 5
- Scarifier teeth: 9
- Size: 14.00R24
- Lift cylinders leak
FT60782000 John Deere 770CH motor grader
- Serial: DW770CH11574586
- Unit #: G9018
- John Deere
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 12
- Moldboard: Tip control, Side shift
- Moldboard total width: 144"
- Front-mounted lift group
- Wing plow: 144"
- Size: 14.00R24
- Spare tire and wheel: 14.00R24
- Intermittent transmission issues, will not always go in gear
- Wing plow removed but included
EW85002005 John Deere 670D motor grader
- Hours: 6,460 on meter
- Serial: DW670DX599732
- John Deere
- Serial: SE6068Z008583
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Combination
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Scarifier
- Scarifier type: Front-mounted
- Rear ripper
- Scarifier teeth: 2
- Size: 14.00-24
- Warning indicator: Check diagnostic code
- AC issues, may need recharge
FC25092013 Caterpillar 140M2 AWD motor grader
Current Bid
$18,500.00
/ 22 Bids
Amarillo, TX
8/13/2026 Thursday
2013 Caterpillar 140M2 AWD motor grader
- Hours: 9,717 on meter
- Serial: CAT014MCM9J00748
- Caterpillar C-9.3
- Serial: MME1112
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Front-mounted push block
- Rear ripper
- Caterpillar
- Ripper shanks: 3
- Scarifier teeth: 9
- Front: 14.00R24
- Warning indicator: Fuel filter restricted
- Key not included
ED53542007 John Deere 770D motor grader
- Hours: 2,500 on ECM
- Serial: DW770DX614280
- John Deere 6081
- Serial: RG6081H298704
- Displacement: 8.1L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Size: 17.5R25
- Dash electrical issue
- Steering column issues, does not lock in place
Recommended For You
JM94771999 Caterpillar 140H motor grader
- Hours: 2,263 on meter
- Serial: 2ZK04065
- Caterpillar 3306
- Serial: 6NC12906
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Cat
- Ripper shanks: 3
- Size: 17.5R25
- Intermittent hydraulic oil temp warning light
FK45522019 Caterpillar 140AWD motor grader
- Hours: 3,005 on meter
- Serial: CAT00140VN9500229
- Caterpillar C9.3
- Serial: SYE33140
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- kW: 130
- Powershift
- 8F - 6R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Backup camera
- Hydraulic control valves: 13
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 3
- Size: 14.00R24
- Jump start required during on-site data collection
EL25662012 John Deere 672GP motor grader
Current Bid
$5,000.00
/ 12 Bids
Casa Grande, AZ
8/27/2026 Thursday
2012 John Deere 672GP motor grader
- Hours: Unknown
- Serial: 1DW672GPPCE644387
- John Deere
- Serial: RG6090R020075
- Cylinders: 6
- Powershift
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted push block
- Rear ripper
- Asbic
- Ripper shanks: 5
- Scarifier teeth: 6
- Size: 17.5-25
- Dead battery
- Fuel pump issues, needs replaced
- Non-operational unit
FM76102012 Caterpillar 140M2 motor grader
- Hours: 9,779 on meter
- Serial: CAT0140MAM9J00663
- Unit #: 385
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Ripper shanks: 1
- Scarifier teeth: 7
- Size: 385/95R24
- Non-operational AC
FM76082008 Caterpillar 160M motor grader
- Hours: 15,644 on meter
- Serial: CAT0160MHB9L00275
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Scarifier teeth: 5
- Rear: 14.00R24
- Possible AC issues, may need charged
FM76092008 Caterpillar 140M motor grader
- Hours: 16,795 on meter
- Serial: CAT0140MPB9M00354
- Caterpillar
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Front-mounted lift group
- Rear ripper
- Ripper shanks: 2
- Scarifier teeth: 5
- Size: 14.00R24
- Warning indicator: Glow plug, Secondary steering system failure
- Possible AC issues, may need charged
FM76112008 Caterpillar 160M motor grader
- Hours: 13,525 on meter
- Serial: CAT0160MCB9L00277
- Caterpillar C9
- Serial: THX13767
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- All wheel drive
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 11'
- Blade accumulators
- Front-mounted lift group
- Make: Caterpillar
- Rear ripper
- Scarifier teeth: 4
- Rear: 14.00R24
- Engine issues, white smoke
- Possible AC issues, may need charged
FM76142001 Caterpillar 143H motor grader
- Hours: 12,486 on meter
- Actual hours unknown
- Serial: 1AL00876
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 13
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Caterpillar
- Ripper shanks: 3
- Snow wing
- Width: 12'
- Size: 14.00R24
- Possible hydraulic system issues
- Non-operational hour meter
Recently Sold
FC17681968 John Deere 570 motor grader
- Hours: 3,070 on meter
- Serial: 000665U
- John Deere
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- Enclosed cab
- Hydraulic control valves: 8
- Moldboard: Tip control, Side shift
- Moldboard total width: 12'
- Front-mounted lift group
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 6
- Scarifier type: Front-mounted
- Front: 13.00-24
- Turntable weld repairs
- Parking brake sensor issues
- Unit must be jumped from starter solenoid
- Steering cylinder issues, leaks
EN04521985 Galion A550 motor grader
- Hours: 3,712 on meter
- Serial: ID-C-11313
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 4F - 4R
- Enclosed cab
- Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Rear ripper
- Scarifier teeth: 7
- Front: 14.00-24
- Hydraulic leak
FC25022007 Caterpillar 140H VHP Plus motor grader
- Hours: 6,360 on meter
- Serial: CAT0140HCCCA03144
- Caterpillar 3176
- Serial: 3PD18527
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Make: Calderon
- Rear ripper
- Cat
- Ripper shanks: 3
- Scarifier teeth: 6
- Front: 14.00-24TG
- Rear: 14.00-24IND
- Warning indicator: Check engine
DQ00812002 John Deere 772CH Series II motor grader
- Hours: 1,187 on meter
- Hours: Unknown
- Serial: DW772CH583156
- John Deere
- Serial: SE6081H390836
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 12
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Size: 14.00R24
- Engine issues, head gasket needs replaced
- Coolant in oil
- Non-operational unit
EX25382005 Caterpillar 140H motor grader
- Hours: 14,157 on meter
- Serial: CAT0140HPAPM02196
- Caterpillar 3176
- Serial: 3PD13059
- Displacement: 10.3L
- Cylinders: 6
- Fuel type: Diesel
- HP: 185
- kW: 138
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Model: 9W3155
- Ripper shanks: 3
- Front: 17.5R25
EX40132003 Caterpillar 160H motor grader
- Hours: 11,044 on meter
- Serial: CAT0160HEASD00307
- Caterpillar 3176
- Displacement: 10.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 11
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Size: 14.00/24
FH61911998 Caterpillar 140H motor grader
- Hours: 16,490 on meter
- Serial: 2ZK02886
- Unit #: 508
- Caterpillar 3306
- Displacement: 10.5
- Cylinders: 6
- Fuel type: Diesel
- HP: 168
- Powershift
- 8F - 8R
- Enclosed cab
- AC, Heat
- Grade control
- Topcon
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted push block
- Rear ripper
- Caterpillar
- Front: 17.5-25
- Rear: 17.5R25
- Ripper lift cylinder leak
- Glass cracked
EX19972015 Caterpillar 12M3 motor grader
- Hours: 13,578 on meter
- Serial: CAT0012MKN9F00218
- Caterpillar C9.3L
- Displacement: 9.3L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 6R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Moldboard: Tip control, Side shift
- Moldboard total width: 16'
- Size: 14.00R24
DQ79352003 Volvo G740B motor grader
- Hours: 4,689 on meter
- Serial: 035381
- Volvo D10BGAE
- Displacement: 9.6L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 4R
- Differential lock
- Enclosed cab
- AC, Heat
- Steering: Joystick
- Hydraulic control valves: 13
- Moldboard: Tip control, Side shift
- Moldboard total width: 13' 11"
- Blade accumulators
- Front-mounted lift group
- Snow plow
- Monroe 00012612
- Width: 14'
- Snow wing
- Width: 12' 1"
- Front: 14.00R24
ET64472010 John Deere 672G motor grader
- Hours: 6,941 on meter
- Serial: DW672GX626771
- Unit #: 2075
- John Deere 6090HDW01
- Serial: RG6090L068853
- Displacement: 9.0L
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 8F - 8R
- All wheel drive
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Circle slip clutch
- Front-mounted push block
- Rear ripper
- Ripper shanks: 3
- Front: 13.00-24
- Rear: 14.00R24
- Warning indicator: Hydraulic oil filter restricted
EE11192005 John Deere 670CH Series II motor grader
Contract Price
$29,700.00
Sioux Falls, SD
7/30/2026 CLOSED
2005 John Deere 670CH Series II motor grader
- Hours: 7,533 on meter
- Unit #: 606
- John Deere 6068
- Displacement: 6.8L
- Cylinders: 6
- Fuel type: Diesel
- kW: 131
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 9
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Scarifier type: Front-mounted
- Teeth: 4
- Scarifier type: Front-mounted
- Size: 17.5R25
ET00071981 John Deere 670A motor grader
- Hours: 31 on meter
- Hours: Actual unknown
- Serial: 10144T
- Unit #: 9566
- John Deere 6414TT
- Serial: 547193
- Displacement: 414 C.I.D.
- Cylinders: 6
- Fuel type: Diesel
- HP: 125
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- Heat
- Steering: Combination
- Hydraulic control valves: 6
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Scarifier
- Make: John Deere
- Scarifier type: Front-mounted
- Teeth: 4
- Size: 14.00-24
FC31351984 Champion D-565T motor grader
- Hours: 3,733 on meter
- Serial: 73.565TC.01.6136.
- Cummins H743C160
- Serial: 68128
- Cylinders: 6
- Fuel type: Diesel
- Powershift
- 3F - 3R
- Enclosed cab
- Heat
- Hydraulic control valves: 11
- Moldboard: Tip control, Side shift
- Moldboard total width: 13'
- Scarifier
- Scarifier type: Mid-mounted
- Size: 14.00-24
- Glass cracked
- Jump start required during on-site data collection
- Hydraulic leak
NJ91632005 Volvo G720B motor grader
- Hours: 36,691 on meter
- Serial: X037869X
- Volvo D7D GBE2
- Serial: 01087699
- Displacement: 436 C.I.D
- Cylinders: 6
- Fuel type: Diesel
- kW: 153
- Powershift
- 8F - 8R
- Differential lock
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Front-mounted lift group
- Make: Henke
- Snow plow
- Width: 9'
- Size: 17.5R25
FC31942008 Volvo G940 motor grader
- Hours: 2,441 on meter
- Serial: VCE0G940J00042178
- Unit #: 19735
- Volvo D7E GBE3
- Serial: 11089662
- Displacement: 7.145
- Cylinders: 6
- Fuel type: Diesel
- HP: 221
- Powershift
- 5F - 4R
- Enclosed cab
- AC, Heat
- Hydraulic control valves: 10
- Moldboard: Tip control, Side shift
- Moldboard total width: 14'
- Blade accumulators
- Rear ripper
- Ripper shanks: 3
- Scarifier teeth: 9
- Size: 17.5R25
Ready to Buy or Sell Motor Grader?
Join countless satisfied customers who helped us achieve 400,000+ successful equipment transactions in the last decade!